oil

Compacted bentonite or sand-bentonite mixtures are considered buffer/backfill materials in the engineering barriers of deep geological repositories for high-level nuclear waste (HLW) disposal in many countries. The design and long-term functionality of nuclear repositories have critical importance for environmental safety and public health. The initially unsaturated buffer material could become re-saturated long after following the sealing of the repository. Although the saturation degree of the buffer might decrease due to high temperatures and evaporation, it tends to increase with groundwater intrusion. Therefore, the soil water characteristic curves (SWCCs) for these unsaturated soils are a key factor in geotechnical engineering. Yet, the determination of SWCCs can be time-consuming and prone to inaccuracies. The HYPROP (Hydraulic Property Analyzer) evaporation technique is a preferred method for accurately determining water retention curves of soils. This reliable method was applied to estimate the water retention curves for sand-bentonite mixtures in the presence of boron minerals. Known for their minimal thermal expansion and commonly used in various industries, boron minerals may improve the thermal stability of sand-bentonite mixtures. The findings revealed that the boron addition increased the water retention capacity of the 10% bentonite mixtures but had a negligible impact on the 20% bentonite mixtures.

Exposure to microplastics is unavoidable, and a vast amount of microplastics are traveling around the oceans. Microplastics are considered one of the major potential pollutants due to their exposure and interference with the health of humans, animals, aquatic species, agriculture, etc. Shockingly, the microplastic was also detected in the human placenta (fetal and amniochorial membranes), which could cause long-term effects on human health. The disposal of plastic into the oceans is the most happening process across the globe; thereby, microplastic pollution is evident, leading to a huge risk to marine species. Also, the accumulation of microplastics on soil or land leads to an increase in pH value, thereby affecting the surface water and soil-groundwater medium, eventually affecting plant and human health. At the same time, microplastics and their particles are found in milk, meat, and other edible items, which directly affects human health. The appearance of microplastic particles in insects, birds, animals, and even human blood indicates its adverse effect on the environment. This review has discussed the impact of microplastic on the health of humans, aquatic species, and agriculture.

Background: Myiasis is a parasitic infestation of livestock animals caused by dipteran larvae. The presence of wounds, lack of hygiene on the farm, and temperate climatic conditions contribute to myiasis. Swine can be infested by myiasis if injured pigs are not treated properly and failure to treat myiasis in time may cause the culling or death of the pigs, resulting in huge economic loss to the farmers. But like humans and other farm animals, pigs also deserve to be treated and cured of any suffering or disease. Therefore, this study is documented on pig myiasis and its management because to date a few cases have been reported on it.Case presentation: This case report documented the successful management of neck myiasis in a male, 9-month-old, 12-kg-weighing backyard pig. The wound site was cleaned using antiseptics and maggots were removed. The site was treated with turpentine oil, and ivermectin at 0.2 mg/kg B.W. and S/C. A combination of streptomycin (12.5 mg/kg B.W.) and penicillin (20000 IU/kg B.W.) was used IM daily for 5 days to prevent secondary bacterial infection. The wound was dressed regularly on every alternate day until the complete removal of maggots and the formation of granulation tissue.Conclusion: Through proper therapeutic management, the backyard pig’s neck myiasis wound was successfully healed in 10 days without any complications.

Aim: To evaluate the effectiveness of an ayurvedic gel in tooth pain reduction due to dental caries. Materials and methods: This in vivo cross-over design study enrolled adults with at least one tooth with caries and a symptom of pain after the application of an ice stimulus. Two hundred patients were screened and eligible patients were enrolled in the study. Forty-five subjects completed washout phases before each recall visit. During each recall visit, subjects evaluated pain relief following an ice bar stimulus and one random finger-tip application of a treatment i.e. Ayurveda Herbal gel containing clove oil, camphor, and menthol (Ayurveda Herbal Gel Group), and two control formulations: a gel without active ingredients and commercial olive oil as a surrogate of home remedy. At each assessment, subjects used a stopwatch to record the onset of pain relief and tooth pain using visual analog scores (VAS), dental pain scores (DPS), and relief from tooth pain by dental pain relief scores (DPRS). After each treatment, subjects recorded their satisfaction with the provided treatment using a four-point satisfaction index. Data were tabulated and statistical analysis was performed with (ANCOVA) and two-way ANOVA with a p - value of 0.05 considered statistically significant. Results: Forty-five subjects (28 males and 17 females) completed the entire study without any adverse events. Application of the Ayurveda gel resulted in a significantly faster onset of pain relief (2.47 min) in comparison to the onset of pain relief after 4 minutes recorded with the controls (p < 0.05). Subjects reported lower VAS and DPS scores over the study period of evaluation when using the Ayurveda gel compared to the application of each control formulation. Subjects also reported greater relief of pain and greater satisfaction after the application of the Ayurveda gel as compared to the controls. Conclusion: Significantly better tooth pain relief from caries was observed from an Ayurveda Herbal gel than from controls.

Based on the results obtained in the study of the interaction of geological and biosphere processes, we found out that there is a close relationship between them. It was also found that the gravity of the bodies of the solar system on the Earth plays a significant role in the above relationship. The effect of gravity was demonstrated on the movement of lithosphere plates, on the processes in the atmosphere and hydrosphere, on related climatic cycles, and the biosphere processes, including "living" organisms' evolution and their mass extinctions. The periodicity of these processes due to gravity is shown. It is expressed in the alternation of short-term orogenic periods of the beginning of the processes with long-term geosynclinal periods of their development and completion. Both periods constitute the repetitive orogenic cycles. The relationship of the cycles with the evolution of photosynthesis, as well as with related Organic Matter (OM) accumulation in sediments after mass extinction of organisms, including OM transformation leading to the formation of Hydrocarbon (HC) accumulations, is shown. Biogenic processes accounting for the accumulation and transformation of organic matter in sediments constitute the biogenic pathway of the formation of hydrocarbon accumulations. It is shown that the influence of gravity extends to the processes in the inner geospheres, including the movement of magma in the asthenosphere under the lithosphere shell, to the movement of hydrogen gas coming from the Earth's core, combining with volatile compounds of elements present in magma, as well as to the rifting process. It is shown that rifting processes lead to the formation of gaseous HC accumulations and constitute a pathway called abiogenic. The obtained results shed light on the peculiarities of the formation of HC accumulations by biogenic and abiogenic pathways, allowing prediction of their chemical characteristics. This is essential when searching for oil and gas and planning exploration works.

The presence of heavy metals (HMs) on Earth is essential to all forms of life. These metals are essential for plant and animal development but can have numerous negative effects on the living environment. In this review, we looked at where HMs come from, why they are harmful, and how they affect plants. Articles indexed in Google Scholar, PubMed, Research Gate, Science Direct, and a few books on heavy metals were consulted for this study. Heavy metals are essential for plant development and growth. According to this analysis, the hazardous effects of HMs are on the rise all throughout the globe, and this trend may be attributed mostly to human activity. Because of its impact on agricultural productivity and environmental changes, soil pollution caused by HMs is among the most crucial elements. Plants have evolved very sophisticated defense systems to deal with these environmental challenges. The threat that HM stress poses to plants has attracted a lot of attention worldwide because it could stunt agriculture’s long-term expansion. In spite of their importance for plants, this study found that HMs pose a significant threat to plant life. The novelty of this review lies in its detailed examination of both the beneficial and detrimental roles of HMs, providing a balanced perspective often overlooked in current literature. The significance of this work is underscored by its potential to inform sustainable agricultural practices and environmental management strategies, as it highlights the delicate balance required to harness the benefits of HMs while mitigating their risks. Despite their necessity for plant development, this review underscores the significant risks HMs pose to plant health and ecosystems.Less than 10 cases have been reported in the literature of the association of germline BRCA1 and Squamous cell Carcinoma – the esophagus. The article focuses on the probable pathogenesis of BRCA1 mutation with non-classic malignancies and the response of Poly adenosine diphosphate ribose polymerase inhibitors (PARP) inhibitors in such a scenario. We report an unusual manifestation of the BRCA1 gene with second primary oesophageal squamous cell cancer occurring five years later to triple-negative breast cancer.

It was proposed to determine the response of chemical fertilization in the production of oil palm (Elaeis guineensis Jacq.) six years old in the area of Rio Negro Shambillo Padre Abad in order to have a sustainable and economic alternative of chemical fertilization in the field stage, which contributes to the survival of the palm and provides the necessary resistance against pests and diseases. A completely randomized block design (DBCA) was used with four repetitions and treatments, 96 plants / UE / treatment were used, the spacing was 9x9 in rows and plants. Results obtained indicate the treatments; T3 and T2 (16,54 – 15,48 kg / plant) obtained the highest averages by bunch weight, T1 and T3 (17,48 – 15,42 fruits / bunch) obtained the highest averages regarding number of fruit / bunch, T1 and T3 (13,93 – 11,59 to 45 cm ) obtained the highest averages for bunch length, T1 and T3 (7,33 – 5,52 cm) obtained the highest averages regarding fruit length, T1 and T3 (11.37 – 9.54 g) obtained the highest averages regarding fruit weight, T1 and T3 (10,46 – 10,37 kg) obtained the highest averages to yield per plant. The addition of chemical fertilizers or organic amendments increases the weight of the oil palm bunch, consequently the production in soils with medium, low fertility; chemical fertilization influences the number of clusters of oil palm produced on a given surface, any dose is used as an alternative to phosphorous fertilization in oil palm with a direct relationship between plant height and root length. 

Modern Agricultural production wants to efficiently produce plant products and benefits to meet people's needs. However, because of better plant species and varieties, overuse of fertilizer and overdose of pesticide alters the plant resources relationship, resulting in soil degradation, vegetation decline, and crop failure or waste of resources, which influence the quality of fruit and benefit and are unfavorable for the sustainable utilization of nature resources and crops high-quality development. After a couple of years of study, the results showed that Agricultural development went into agricultural high-quality development in 2017, which is to use effective measures or methods to maximize yield and benefits and meet the need of people's need for better Agricultural produce and a better life. The theory foundation of the sustainable utilization of natural resources and Agriculture high-quality production is the resources use limit by plants, vegetation carrying capacity, and critical period of plant resources relationship regulation. The methods of Agriculture high-quality development are to select excellent plant species or varieties based on site conditions and market needs before planting crop young plants and sowing seeds, adopt appropriate initial planting density when planting crop young plants and sowing seeds, and regulate the relationship between plant growth and resources need in the process of crop production in a timely and appropriate amount, especially the chemical fertilizer and pesticide to obtain the maximum yield and benefits and realize the sustainable utilization of natural resources and achieve agricultural high-quality development.

Citrus sinensis is a rich source of bioactive compounds  and has attracted attention due to its medicinal benefits. Historically regarded as agricultural waste, orange peel is rich in flavonoids, polyphenols, tannins, and essential oils with antibacterial, anti-inflammatory, and antioxidant qualities. The phytochemicals in Citrus sinensis peel were used as natural reducing and stabilizing agents in the green synthesis method used in this work to create silver nanoparticles (AgNPs). This method is an environmentally friendly alternative to conventional nanoparticle production, eliminating the need for hazardous chemicals. Based on the study’s results, green-synthesized silver nanoparticles derived from Citrus sinensis peel extract offer a sustainable and biocompatible substitute for biomedical applications. The pharmaceutical and healthcare industries may find therapeutic uses for them due to their exceptional antibacterial, antioxidant, and anticancer properties.

Pachydermoperiostosis, also known as Primary Hypertrophic Osteoarthropathy (PHO), is a rare genetic disorder. The three main features are: enlarged fingertips (clubbing), thickened facial skin (pachydermia), and excessive sweating (hyperhidrosis). PHO is characterized by problems with skin and bone growth. Patients with PHO usually have coarse facial features with oily, thick, grooved skin on the face, joint pain, enlarged fingertips and toes, and hyperhidrosis of the hands and feet. Symptoms vary individually; however, men generally present with more severe manifestations. X-rays can help check for features that are not noticeable to the naked eye. There are two genes that are associated with PHO: the HPGD gene, located on the long arm of chromosome 4 at 4q34.1, and the SLCO2A1 gene, located on the long arm of chromosome 3 at 3q22.1 - q22.2. Mutations in the HPGD gene are inherited in an autosomal recessive manner, and the condition is sometimes abbreviated as PHOAR1 or Touraine-Solente-Gole syndrome.