ure

Annually the list of pesticides is replenished by new ones. One of the main criteria for their registration is toxicological and hygienic assessment and its impact on the environment. In order to register the new soy herbicide Damu - Safen, EC (fomesafen, 250 g/l) it was necessary to assess its toxicological and hygienic impact on the environment and humans. Therefore, for the first time we conducted studies of the environmental objects under the influence of Damu-Safen, EC (fomesafen, 250 g/l) and the risk assessment of the active substance fomesafen and pesticide Damu - Safen, EC on the workers. According to the results of the assessment of working conditions for the workers of the tanker and the tractor operator, an acceptable risk was obtained that meets regulatory and hygienic requirements. Residual amounts of fomesafen not exceeding the normative levels were found during conducted studies on environmental objects. Consequently, the results of the risk assessment in the application of pesticide Damu-Safen, EC (fomesafen, 250 g/l) and its impact on the working people and environmental objects indicate the possibility of its application in compliance with optimal environmental conditions and compliance with regulations for appliances and personal protective equipment.

The carried work has based on transient vibration response of multiple degrees of freedom (MDOF) system. By this work study of Time–history analysis and prediction of the displacement for excitation has done. For the MDOF system, we have taken the four-storey building to done transient vibration. We establish the equivalent spring-mass system. Transient analysis has done for both Undamped and Damped of the forced system of multiple degrees of freedom (MDOF) system. In the case of the Damped system, we have done three stages of damping, i.e., (1) Underdamped system, (2) Critically damped system, (3) Overdamped system. The time-history graph obtained for two different time stages i.e. 0.001 sec & 0.01 sec with initial time 0.000001 sec. The natural frequency has determined by both theoretical calculation and ANSYS. The whole study of transient vibration makes it possible to predict the damping values that oppose any kind of sudden impact or force vibration, such as blasts, earthquakes and tsunamis. The ANSYS is the modelling and simulation software is used to perform the transient vibration response. The Mode Superposition method is used by ANSYS to calculate the structure response

The analytical models are mainly combined with numerical equations for the problems of the pavement under the wheel load. Different assumptions can be considered, such as elastic asphalt and viscoelastic as well as static or dynamic load. Mainly on deformation at the bottom of asphalt and tension layers focus on subgrid. The pavement structure was considered as layers with uniform characteristics. Therefore, this analytical model calculates the three-dimensional contact tension between the wheel and the pavement and the shape of the contact area. Basis and subgrid are considered linear and the asphalt layers can be linear or viscoelastic. This model is based on the results of direct shear stress tests at an axial load constant. The curves obtained from this experiment can be defined by three parameters: the maximum shear stress (shear stress curve versus shear displacement), the interaction modulus between the layers (the same curve slope) and the friction coefficient after the failure. Due to the ability of ABACOUS software, this project is done with this software. One of the methods widely used to predict viscoelastic responses of asphalt mixtures is the finite element method. ABAQUS software is one of the tools that can simulate mixed asphalt behavior based on a finite element method, taking into account all the determinant parameters. The use of the Prony series is one of the common techniques for describing the viscoelastic behavior of asphalt mixtures in ABAQUS software. For this purpose, it is necessary to determine the parameters required for this field, including proven constants, moment elastic modulus, and asphalt mixture poison ratio. On the other hand, the determination of these parameters through testing in addition to spending time and costs requires laboratory equipment. Therefore, in this thesis, a three-dimensional finite element model with ABAQUS software was constructed to analyze the persistent pavement using theoretical relations without conducting the experiment. Also, viscoelastic behavior of common asphalt mixtures and time dependence of its responses at different temperatures can be modeled in ABAQUS software. After performing the shear stress test for different axial loads, different temperatures, with or without a single coil, they found that all parameters are temperature dependent and the coefficient of friction does not depend on the applied axial load. This new model improves the accuracy of the finite element model and its important role can be an analytic expression that includes all the variables that are effective in the problem.

Assuming that the road infrastructure has been implemented in accordance with specifications and standards, poor adhesion between the two layers of asphalt mix can be a significant cause of pavement problems. The general problem observed with the weak adhesion between the layers is the slip failure. Slipping disruption in areas where transport acceleration increases, in areas where acceleration decreases or may occur in bumps. One of the criteria and a test method for measuring adhesion resistance between the hot mix asphalt layers is needed to improve the surface finish. The main objective of this study is to determine the effect of reducing the coefficient of friction between asphalt layers in the displacement of asphaltic layers. Because performing experimental experiments in the country is a deterrent to this goal, the use of analytical and numerical methods has been shown to play an important role in conducting studies. Therefore, in this paper, using vehicle simulation in ABAQUS software and analyzes, it has been found that decreasing the coefficient of friction (adhesion reduction) increases the interlayer deformation, which causes the surface of the pavement to fail. Three different thicknesses for asphalt cladding, including 4, 6, and 7 centimeters, and three different thicknesses for roller concrete layers of 18, 20 and 22 centimeters are used. Modeling and analysis of pavements with finite element method has been performed and the depth of the asphalt and tensile strain slope is calculated at the maximum level. The results show that the type of asphalt mix has a high impact on the amount of sloping and tensile strain at the maximum level. So that under different conditions it is estimated to be about 2-3 times in the amount of rotation at the surface. Also, the amount of groove and strain in the middle of the procedure is increased by a thickness of 11% the thickness of the roller concrete thickness has not changed, but the surface strain has been reduced by 9%.

Background: Early and effective identification of childhood neurodevelopmental disorders remains a critical task of all pediatric healthcare professionals, which is critical to the well-being of children and their families. Methods: A retrospective review of medical records of all preschool children referred to a Child Development Centre (CDC) in North-West England, over a six-month period between Sept 2014 and Feb 2015 was conducted. The local multi-professional approach to the clinical assessment and management of preschool children was described and the published literature on this topic was reviewed. Results: Twenty four different categories of professionals spanning the whole range of primary, secondary, and tertiary healthcare, social care and educational services were involved in the management of the patients. The largest group of professionals was the primary healthcare specialists. The ten different primary care professionals managed an average of 42% of the patients. The secondary healthcare providers were involved in the care of an average of 17%, tertiary care providers 10%, educational specialists 25% and social care professionals were involved with 5% of all the patients. The commonest diagnostic disorders were Speech/Language delay (56%), Global developmental delay (33%), Behavior difficulties (26%), Social communication concerns (21%) and Autistic spectrum disorder (19%). Conclusion: The high number and specialties of various healthcare professionals at all levels of care indicates the high social and economic investment required in managing the affected preschool children in the region. Childhood neurodevelopmental disorders in the preschool age represents a high level of public health significance.

For over twenty years, following the creation of space stations, MIR first and then the ISS (International Space Station) men (3 to 6) live and succeed each other continuously about 300 - 400 km of altitude to make scientific experiments. For this reason sending men into space has become an activity “almost banal or regular “but this remains potentially a very dangerous environment for the adapted manon Earth and thus requires medical monitoring to ensure the health of astronauts and the persistence of their ability during their mission. In general, the medical benefits on Earth of space conquest go far beyond envy and the need for man to discover the cosmos but to develop many tools medicines to also offer solutions for all living beings on Earth!

ADHD is the most common neurodevelopmental disorder in children and adolescents with prevalence ranging between 5% and 12% in developed countries. There is ample evidence that carefully structured enhanced behavioural parenting programmes are useful in the management of ADHD. We assessed the outcome of an ADHD group parenting training programme (APEG) offered between 2014 and 2015 by the Peterborough Neurodevelopmental Service (NDS) in improving the knowledge and skills of carers using a pre-/post-training intervention study. APEG follows a Parent Advisor Model, consisting of a 6-session programme of evidence-based parenting training. A total of 27 parents completed the 53 pre- and post-course questionnaires. The knowledge and understanding of the parents increased significantly about all aspects of ADHD diagnosis and management in response to all the 5 questions. The difference between the scores of 0 to 3 and 4 or 5 pre- and post-intervention was statistically significant (chi square 239, df 1, p value <0.01). The study suggests that provision of a psychosocial intervention programme for parents of ADHD children through the APEG parenting training proved to be effective in significantly improving the level of knowledge and understanding of parents regarding several aspects of ADHD diagnosis, symptom identification and behaviour control.

The article discusses approaches to solving problems of accurately determining strength in kinematic pairs. It is known that the nature of the bonds imposed by kinematic pairs is determined by the geometric shapes of the elements of the pairs. For what, here, the bonds acted during the entire time the mechanism was moving, so that the elements of the kinematic pairs would continuously touch each other. Where it is recognized that one of the simplest methods for taking into account the inertia of a link is the principal moment method. How the contradiction is sought is here because the normal acceleration has a direction opposite because normal acceleration has a direction opposite to the link (directed toward the center), and the image of tangential acceleration is directed parallel to this acceleration. The following simplification can be made if the main vector of inertia is considered together with the weight of the link.

For the operational forecasting of the dynamics of moisture reserves, it is reduced to the prediction of precipitation and total evaporation (E). The remaining elements of the balance either do not change over time, are either known or are defined as functions of P and E. The plant’s need for water E (evapotranspiration) is determined on the basis of the bioclimatic method in the modification of B.V. Danilchenko (2) by the formula: Eu = Е К b K M (1)

The silt fractions have a great impact in soil structural formation. If the soil forming rocks don’t disturb, crush and weather, the soil forming processes on them occur weakly, the organic substances cause formation of the loamy stratums without completely turning. This mostly influences the initial soil forming layers. The reproduction minerals in these soils cause initial minerals majority by occurring weakly. If these processes occur quickly then they cause a gradual increase of the reproduction minerals and reduction of the initial minerals. The heights of the zones where the geographical spreading of such stratums is situated depend on levels.

Industrial control systems (ICS) are critical, as in these systems, cyber threats have the potential to affect, disorganize, change their mode of operation, act as an information extraction vehicle, and ultimately turn against itself. Creating risks to the system itself, infrastructure, downtime, leakage of sensitive data, and even loss of human life. Industrial control systems (ICS) are vital to the operation of all the modern automated infrastructure in the western world, such as power plant and power stations. Industrial control systems (ICS) differ from the traditional information systems and infrastructures of organizations and companies, a standard cyber security strategy cannot be implemented but part of it adapting to the real facts and needs of each country, legislation and infrastructure. These systems require continuous operation, reliability and rapid recovery when attacked electronically with automated control, isolation and attack management processes. Incorrect settings and lack of strategic planning can lead to unprotected operation of critical installations, as they do not meet the cyber security requirements. Industrial control systems (ICS) require special protection in their networks, as they should be considered vulnerable in all their areas, they need protection from cyber attacks against ICS, SCADA servers, workstations, PLC automations, etc. Security policies to be implemented should provide protection against cyber threats, and systems recovery without affecting the operation and reliability of operating processes. Security policies such as security assessment, smart reporting, vulnerability and threat simulation, integrity control analysis, apply security policy to shared systems, intrusion detection and prevention, and finally firewall with integrated antivirus and sandbox services should be considered essential entities.

Introduction and goal: From the perspective of Islam, spiritual health means having a Sound Heart (a calm, confident and optimistic soul, with hope for God’s mercy, satisfaction with destiny and vitality). The way to achieve spiritual health is strengthening the faith and taking good deeds based on religious spirituality. This study was conducted with the aim of determining the impact of spiritual health (Sound Heart) on the other aspects of health at different levels of prevention. Methods: In nine phases of research in 16 years, after designing and validating the “Sound Heart Model”. The spiritual problems of patients and healthy clients were determined. Spiritual care guidelines and the spiritual counseling model in patients and healthy clients were designed. Then “Parent’s Spiritual Empowerment Program”, “inter-professional spiritual health care training program” was extracted. Based on the findings of the previous steps, the effect of spiritual health on other aspects of health at different levels of prevention was extracted. Findings: Belief in God and divine love creates spiritual health (Sound heart) with wisdom, chastity, courage, justice, dignity, kindness, and sincerity in action. Faith prevents neglecting from the God’s remembrance and its consequences such as: unhealthy lifestyle, risky behaviors, destructive excitements, psychosocial diseases in clients and eliminates the fear, anxiety, sadness and disappointment in patients. Spiritual health causes living in the present time with patience and grace of God, creates hope, optimism for the future, courage to face life crises. By creating mental health, it improves the psycho-neuron-immunologic function and improves physical health. Conclusion: Considering the great impact of spiritual health on the other aspects of health at all levels of prevention, it is imperative that students and health care staff, by referring to these concepts, carry out spiritual care/counseling.

Aim: With the continuing trend in the incidence of diabetic ulcer, the current researches on wound care and healing will bring best and effective practices on wound care and healing among patients suffering from diabetes mellitus. Methods: This study utilized a systematic review of literatures in light of wound care through Pub Med database with the key words “Diabetes Mellitus,” “wound practices,” “wound healing,” and “systematic review.” The searched literatures were of case reports, interventional studies, and review papers whose main texts were in English. Results: There were 7,988 published articles yielded from the keywords used and 16 were included in this study. The practiced management and techniques in these literatures focused on comfortable and cost efficient means of wound care and healing with the involvement of group participation than individual plan of care. Conclusions: There are meager evidences of feasible wound and healing options that needs further studies in resolving wound issues among patients with Diabetes Mellitus. This systematic review establishes the insufficiency of high level of evidence based studies on wound healing in DM patients and brings a track for continuity of rigid studies concerning this topic.

The main purpose of this investigation is to inspect the innovative conception of the magneto hydrodynamic (MHD) nanoparticles of single wall carbon nanotubes base on the fluids (water, engine oil, and ethylene, glycol and kerosene oil) between two rotating parallel plates. Carbon nanotubes (CNTs) parade sole assets due to their rare structure. Such structure has significant optical and electronics features, wonderful strength and elasticity, and high thermal and chemical permanence. The heat exchange phenomena is deliberated subject to thermal radiation. Kerosene oil is taken as based nano fluids because of its unique attention due to their advanced thermal conductivities, exclusive features, and applications. The fluid flow is presumed in steady state. With the help of suitable resemblance variables, the fundamental leading equations have been converted to a set of differential equations. To obtain the solution of the modeled problem, the homotopic approach has been used. The influence of imbedded physical variables upon the velocities and temperature profiles are defined and deliberated through graphs. Moreover, for the several values of relevant variables, the skin fraction coefficient and local Nusselt number are tabulated. Plots have been presented in order to examine how the velocities and temperature profile get affected by various flow parameters.

In the paper a methodology that is elaborated for characterization of big-sized chambers of modern and future nuclear fusion reactors is described. It gives an opportunity to define distortions introduced by surroundings, systems and elements of the chamber into the neutron field generated during the reactors’ operation. The procedure is based on two types of experimental techniques supported by MCNP numerical modelling. These two classes are: 1) the neutron activation methods for measuring changes in anisotropy of the “absolute” neutron yields, and 2) the time-of-flight process for determination of neutron spectra deformations. MCNP calculations afterwards give an opportunity to fix just those elements of the surroundings that introduce the main impact in the perturbed neutron field characteristics.

A new principle of origin and the nature of the action of gravity forces are proposed. Forces of universal attraction have plane-symmetrical directions. On this basis, it becomes possible to reconsider certain regularities in natural science. The new principle of gravitation will allow to explain physical paradoxes, to improve methods of scientific research and some technological processes.

Background: NSU is generally caused by right cerebral hemisphere lesions with a preeminent localization on the frontoparietal lobe. Aim: To assess the correlation between the typology and the brain lesion site and the consensual consent modality of body image modification after an integrated rehabilitative and neuropsychological treatment. Setting: A rehabilitation institute for the treatment of neurological gait disorders and neuropsichological failures. methods: Patients recruited were divided according to the brain lesion site into 3 groups (IG = ischemic group = 5 patients; HG = hemorrhagic group = 4 patients; IG + HG = ischemic + hemorrhagic group = 3 patients) based on CT brain performed in the post-acute phase. At time T0, the patients recruited underwent a systematic review of their current neuroradiological profile (location delineation and type of brain injury) compared with a consensual framing of the neuromotor and neuropsychological profile acquired at the time of taking charge in the ward. At time T1 and after the drafting and implementation of the rehabilitation treatment plan foreseen in the study (1 to 4 months after T0), the patients in our sample underwent a re-evaluation of their neuromotor and neuropsychological profile with controls of the same outcome parameters considered at time T0. Results: A parametrically but not statistically significant modification of the results obtained was observed by measuring the MI ULl, MI LLl and TCT scales in the group with hemorrhagic brain injury; the analysis of variance did not show any statistical significance in the relationship between the type of stroke (ischemic, hemorrhagic or both) and the motor impairment passing from time T0 to time T1. The analysis of variance did not reveal a statistically or parametrically significant relationship between the type (ischemic, hemorrhagic and ischemic + hemorrhagic) of cerebral stroke and the variations of the neuropsychological profile. The T-Student test showed statistically significant changes in the importance of the lesion site in defining the degree of motor disability. In particular, we observed, about the presence of frontal lobe lesions, a statistically significant variation passing from the T0 time to the T1 time for the following motor scales in 9 of 12 recruited patients: MI LLl (26.4 vs. 62, with p < 0.05), TCT (43.6 vs. 80.6, with p < 0.01 for equal variance assumed and p < 0.05 for equal variance not assumed), FAC (0.8 vs. 2.3 with p < 0,01 for equal variance assumed and p < 0.05 for equal variance not assumed). Conclusion: We have confirmed the importance of the anatomical-dysfunctional correlation as a key concept from which to start in any neurorehabilitative treatment approach. Our work has highlighted the basic role of the right frontal lobe in the programming and execution of the gesture and its kinesthetic control as regards the left lower limb and the trunk.

Graphical abstract Biodegradation of implanted gold in human tissue. TEM images reveal markedly biodegradation of implanted gold and re-crystallization of dissolved gold as nanoparticle of different size, shape and crystallinity. Highly crystalline icosahedral Au nanoparticle and the corresponding power spectrum are shown on top. Background: Despite the importance of biodegradation for the durability of metal prosthesis and the widely use of gold implants, there exist a lack of knowledge regarding the stability of pure gold in tissue. Methods: We studied biodegradation of grids of pure gold, nickel, and copper as well as middle ear prosthesis of gold, platinum or titanium. Metals were implanted into rat skin and humans. Dissolution and re-crystallization process of the metals was analysed using SEM, TEM, power spectra as well as elemental analysis by EDX and EELS/ESI. Results: Biodegradation of gold was detected, presumably by solving and re-precipitation of gold around implants. Gold cluster, nanoparticles, and mesostructures were detected, formed by dissolution and re-crystallization process. This process results into a migration of gold into the farer off tissue. Cellular filaments as biomolecular templates facilitate the formation of mesostructures. Loss of function of middle ear prosthesis by biodegradation is caused by chronic inflammation and fibrosis. Indeed, similar processes were detected with platinum, but in a very lower level. Conclusion: Noble metal implants undergo biodegradation in oxidative environment in tissue. The dissolution – recrystallization process can be explained by enzyme catalysed redox processes comprising reactive oxygen species and reduction agents as ascorbic acid present in cells and body tissue. Enymes like myeloperoxidase inside lysosomes of inflammatory cells produce hypochloride ions and H2O2 which can dissolve the gold. General significance: The crucial role of the specific chemical environments of gold implants in tissue for their chemical stability and durability of function has been demonstrated. Due to widely use and importance of gold implants, this finding is of general interes.

The demand for materials and devices that are capable of controlling heat flux has attracted many interests due to desire to attain new sources of energy and on-chip cooling. Excellent properties of DNA make it as an interesting nanomaterial in future technologies. In this paper, we aim to investigate the thermal flow through two sequence combinations of DNA, e.g, (AT)4 (CG)4 (AT)4 (CG)4 and (CG)8 (AT)8. Two interesting phenomena have been observed respectively. In the first configuration, an oscillatory thermal flux is observed. In this way, an oscillating heat flux from a stationary spatial thermal gradient is provided by varying the gate temperature. In the second configuration, the system behaves as a constant heat current source. The physical mechanism behind each phenomenon is identified. In the first case, it was shown that the transition between thermal positive conductance and negative differential conductance implies oscillatory heat current. In the latter, the discordance between the phonon bands of the two coupled sequences results in constant thermal flow despite of increasing in temperature gradient.

Introduction: High proportion of stroke survivors have impaired functional mobility and decrease in overall quality of life (QoL). Transcranial direct current stimulation (tDCS) (non-invasive brain stimulation) and over-ground walking task (OGWT) (functional task-oriented training) have been suggested to improve functional mobility and QoL of stroke survivors. Hence, this study determined the efficacy of tDCS (anodal and cathodal) with OGWT on functional mobility and QoL of stroke survivors. Materials and methods: Seventy eight (78) stroke survivors were randomised into three groups: anodal group (anodal tDCS with OGWT); cathodal group (cathodal tDCS with OGWT) and control group (OGWT only). Participants had two sessions of intervention per week for six weeks. Functional mobility was assessed using 10 meter walk test (10MWT) measuring steps, time and velocity while QoL was measured using Stroke Specific QoL (SSQoL) scale. Significance level was set at p < 0.05. Results: Participants (46 males) were aged 56.78 ± 10.24 years. The groups were matched for functional mobility and QoL at baseline and only work/productivity domain of SSQoL showed statistically significant difference (p = 0.028). Each group showed statistically significant improvement between baseline and post-intervention scores of items in functional mobility (p ≤ 0.001) and total SSQoL (p ≤ 0.001). Anodal group showed better statistically significant improvement in step (p = 0.008), time (p = 0.024), velocity (p = 0.001) and total SSQoL (p = 0.016) among the groups when the mean differences were compared. Conclusion: tDCS with OGWT is efficacious in improving functional mobility and QoL of stroke survivors. Specifically anodal tDCS with OGWT showed better clinical improvement in step, time, velocity and QoL in stroke survivors.