A great mimicker of Bone Secondaries: Brown Tumors, presenting with a Degenerative Lumber Disc like pain
Published on: 17th July, 2017
OCLC Number/Unique Identifier: 7317646408
This report presents an adult patient suffering from sacroiliitis like low back pain, lumbosacral radiculopathy and elbow swelling. Multimodality imaging revealed multiple lytic bone lesions located in supra acetabular iliac bone, sacrum, and distal end of radius. Painful numerous lesions due to the extension to the articular surfaces are not expected for Brown tumors. Less than ten cases with multiple Brown tumor due to primary hyperparathyroidism has been reported. Although Brown tumors are mostly diagnosed incidentally, this case would awake the physicians about rheumatological symptoms in the presentation of Brown tumors. Since Brown tumors are non-touch bone lesions that are expected to regress after parathyroid adenoma removal, it is important to distinguish Brown tumors from the giant cell tumors.
Infection Control Mechanisms Employed by Dental Laboratories to Prevent Infection of their Dental Technicians/Technologists
Published on: 30th November, 2016
OCLC Number/Unique Identifier: 7286428022
Objective: The aim of the study was to determine the compliance to infection control of various dental laboratories in Durban.
Study design: This was a qualitative survey.
Setting: Dental laboratories in Durban area, South Africa.
Subject: Registered laboratory technicians.
Study methodology: Convenient random sampling method was used.
Results: There was poor compliance to infection control procedures by most dental laboratories. Majority, 66.67%, of the dental laboratories relied on dental clinics for disinfection of dental impressions; therefore, they did not disinfect the impressions. On the other hand, only 33.33% carried out disinfection of dental impressions on their own. A high number (53.3%) of the respondents had disinfection areas within their dental laboratories, 6.7% had no disinfection areas while 40% depended upon dental clinics for all disinfections. About 60% of the dental technicians had valid vaccinations against Hepatitis B Virus while 40% had no vaccination against HBV.
Conclusion: The results of this study indicated that there was substantial nonconformity to infection control measure in all dental laboratories. There should be comprehensive inspection of dental laboratories prior to licensing and thereafter by the South African Dental Technician Council’s inspectors to ensure that all dental laboratories comply with the various infection control measures.
Evaluation of ImageJ for Relative Bone Density Measurement and Clinical Application
Published on: 15th December, 2016
OCLC Number/Unique Identifier: 7286423139
The main method for evaluation of healing processes of the jaws in oral and maxillofacial surgery are radiological diagnostics. Quantitative description is possible by measuring the relative bone density, which puts the mean grey value of a certain area in relation to the surrounding bone tissue. In this research the intra- and interindividual variability is determined for this method and a standard operation procedure is elaborated.
Therefore ten panoramic radiographs of typical surgical indications in oral a maxillofacial surgery were analyzed by three different members of the workgroup, five times each. The measurements were analyzed with descriptive and comparative statistical methods.
The mean coefficient of variation was 2.972% ± 2.361%. The measurements of defect regions were more consistent (2.252% ± 1.928%) than the measurements of surrounding bone (3.691% ± 2.626%). The analysis of variance did not show a statistically significant influence of the different raters to the measurements (ANOVA, Pr>F = 0.9462).
Following the standard operation procedure this method seems to be an easy, cheap and close to practice way to visualize healing process of the jaws. Especially in the mandibula, but also in the maxilla with special reconsideration of the sinus-region, it seems to be suitable.
Predicament of classification: Multisystem small vessel vasculitis with cresentic Glomerulonephritis
Published on: 9th April, 2018
OCLC Number/Unique Identifier: 7666350132
The patient is a 28-year old Caucasian man with six month history of arthralgia and crampy abdominal pain who presented with acute dyspnea and cough for 6 months associated with migratory polyarthralgias involving his knees, ankles, wrists, and shoulders.
Promising Future in the Detection of Oral Cancer by Using Advance Screening Technology
Published on: 30th December, 2016
OCLC Number/Unique Identifier: 7286354686
Oral cancer has a tendency to be detected at late stage which is detrimental to the patients because of its high mortality and morbidity rates (survival rate 15-50% [1]). The incidence of oral cancer worldwide is approximately 3% of all malignancies, thus creating a significant worldwide health problem [2].
Evaluation of Horizontal Lip Position in Adults with Different Skeletal Patterns: A Cephalometric Study
Published on: 10th March, 2017
Aim: To evaluate sexual dimorphism in horizontal lip position in adults with different skeletal patterns.
Material and Methods: The sample comprised of 120 patients (Females 18 years and above, Males 21 years and above) with no history of previous orthodontic treatment or functional jaw orthopaedic treatment. They were divided into different groups based on the ANB angle and gender. Group I and II included 30 males and 30 females with skeletal class I malocclusion (ANB 0-4 degree). Group III and IV included 30 males and 30 females with skeletal class II malocclusion respectively (ANB above 4 degree).
Results: When comparison between males and females (Class I+Class II) was done S-line (p<0.001), B-line (p<0.001), E-line (p<0.001), Holdaways angle (p<0.001) and Merrifield angle (p<0.001) were found to be statistically significant. S-line (p<0.001), E-line (p<0.001) and Holdaways angle (p<0.001) were found to be statistically significant when comparison was done between males and females (Class I). When comparison was done between males and females (Class II) only Holdaways angle (p<0.001) showed a significant statistical difference.
Conclusion: Sexual dimorphism was found in various lip parameters. Significant amount of differences were found between Class I and Class II (male and female) subjects.
Normal Value of Skull Base Angle Using the Modified Magnetic Resonance Imaging Technique in Thai Population
Published on: 20th March, 2017
OCLC Number/Unique Identifier: 7286350678
Purpose: To determine the normal value of basal angle measured using the modified MR imaging technique in Thai population compared with the standard value obtained from the Western population.
Material and Methods: We retrospectively evaluated midline sagittal SE T1 weighted MR images in 200 adults and 50 children. The basal angle of the skull base was measured using the modified MR imaging technique described by Koenigsberg et al. The angle was formed by a line extending across the anterior cranial fossa to the tip of the dorsum sellae and another line drawn along the posterior margin of the clivus. The mean values of the basal angles among different age groups and sex were calculated and analyzed.
Results: The mean skull base angle of our adult population was 115° (range 100.5°-130°, SD=5.7) with an inter-observer agreement of 0.85, slightly smaller than the previous study from the USA which was 117°. There was no significant difference between the male and female groups. The mean skull base angle in our children population was 114.7° (range 102- 130.5°, SD=6.3) with an inter-observer agreement of 0.89, quite similar to the previous USA study which was 114°. There was no significant difference between adult and children.
Conclusion: The mean adult skull base angle measured using the modified MR imaging technique in Thai population was slightly smaller than the Western population, while the mean skull base angle of children was quite similar. The basal angle range of 103.6°-126.4° may be used as a guide for the potential range of normal skull base angles in Thai population and possibly also the Southeast Asian population.
Comparative Study of Enophthalmos Treatment with Titanium Mesh Combined with Absorbable Implant vs. Costochondral Graft for Large Orbital Defects in Floor Fractures
Published on: 23rd March, 2017
OCLC Number/Unique Identifier: 7286350491
Introduction: Several treatment options are available for the optimal treatment for orbital fractures, depending on aesthetic and functional results after orbital wall reconstruction. The objective of this study is to compare the effect and safety of large orbital floor fractures with titanium mesh combined with poly-L-lactic acid/polyglycolic acid copolymer implants (Lactosorb®) vs. autologous costochondral graft. A wide range of permanent and biodegradable materials have been used successfully for orbital floor reconstruction, however they present with disadvantages for reconstruction of large defects, even if combined.
Patients and Methods: A retrospective cohort study of patients from Estado de México, México, with access to ISSEMYM health care service, presenting with orbital floor fracture treated at Department of Plastic & Reconstructive Surgery/Maxillofacial Surgery at ISSEMYM Medical Center Toluca between January 2007 and July 2010. Age, sex, etiology, clinical findings, fracture pattern, and treatment modality (Titanium mesh with absorbable implant vs. costochondral graft) were considered. Predictor and outcome variables as complications, inpatient, trauma- surgery interval, surgical time and donor site pain are considered.
Results: Follow up of 21 patients (12 weeks) 17 male, 4 female, ages 22-63 was made. Enophthalmos, main objective of this study, was identified with statistical significance presenting 0% (n=0) post-op Group B patients and 30% (n=3) for Group A (p=0.049). Statistical significance was found referring to inpatient days between two groups being less for costochondral reconstruction patients (p=0.02). No pain in patients undergoing alloplastic surgery. An interesting result was that donor area analogue pain scale for costochondral graft was 2.9/10.
Conclusion: Surgical outcome and complications where evaluated comparing different materials for orbital floor reconstruction. Costochondral graft is a suitable choice when orbital reconstruction is indicated.
Visualization and Evaluation of Changes after Rapid Maxillary Expansion
Published on: 30th March, 2017
OCLC Number/Unique Identifier: 7286430438
Objectives: The aim of the study was to develop a mathematical model for the visualization and evaluation of transversal palatal soft tissue changes; and to carry out a statistical evaluation of the changes in vertical and sagittal dimensions after rapid maxillary expansion treatment.
Material and Methods: 33 Caucasian children with posterior crossbite, 10 boys and 23 girls, aged 7 to 10 years (median 8 years 8 months) were treated with tooth-borne Haas type expander. Dental casts were digitalized by scanner and on the basis of quantitative mesh shape CPD-DCA analysis, coloured morphometrical maps were created. The statistical significance of individual vertex displacements was calculated by performing Hotelling’s T2 paired test. To determine the significance of the vertical and sagittal profile changes, the paired t-test and Wilcoxon signed rank test were carried out in 20 patients
Results: Visualization of the palatal soft tissue widening showed it to be greatest in the areas of the second deciduous and first permanent molars with maximum of 0.75 mm for each palatal side. Hotelling’s T2 paired test showed significant differences of p<0.01 in transversal width dimension. Cephalometric measurements of the changes to vertical and sagittal dimensions were statistically evaluated using the Wilcoxon and paired t-tests, and were shown to have insignificant values of p>0.05.
Conclusion: The expansion appliance in children resolved the crossbite and led to palatal widening, which was clearly visualized by creating mathematical morphometric models. The cephalometric measurements carried out did not reveal statistically significant relevance in changes to facial vertical or sagittal dimensions.
Orthodontics Miniscrews to Correct an Anchorage Loss: Case Report
Published on: 7th April, 2017
OCLC Number/Unique Identifier: 7286424900
The recent introduction of the miniscrew in orthodontics revolutionized the clinical and biomechanical approach of anchoring. Used as direct or indirect anchoring, the orthodontic micro screws indications field is expanding due to their easy insertion, and their immediate loading ensuring an absolute anchoring. Our objective through this clinical case is to show the effectiveness of these miniscrews in the correction of the uncontrolled loss of anchoring.
External Root Resorption associated with Impacted Third Molars: A Case Report
Published on: 26th April, 2017
OCLC Number/Unique Identifier: 7286358319
The indications for impacted third molar extraction include the prevention of dental reabsorption on the adjacent tooth. Resorption can be classified as physiological (when deciduous teeth are exfoliated) or pathological (when caused by injury or irritation to the periodontal ligament). Many causes can trigger external root resorption (ERR), the most common cause of which is orthodontic forces. The most common cases of ERR involve impacted third molars which, due to the lack of space for their eruption, generate a greater chance of ERR on the distal portion of the second molar. This pathology is becoming progressively more frequent in clinical dental care. Periapical and panoramic radiographs are used to aid in diagnosis, as is cone beam computed tomography. In cone beam computed tomography scans, radiolucent areas with irregular gaps are detected; these gaps represent a significant loss of dental material. The objectives of this article were to report a case of second molar resorption triggered by an impacted third molar and to perform a review of the literature on the causes of external root resorption. Ideally, this information will aid dental clinicians (and orthodontists in particular) in understanding the features of this pathology so that they may recommend preventive third molar extraction when necessary.
Clown language training in Dental education: Dental Student’s Perspective
Published on: 9th May, 2017
OCLC Number/Unique Identifier: 7286356938
Clowning is a form of humour. It is an art form that invites play, interaction, and laughter. Clown Care is a programme in hospitals and medical centres involving visits from specially trained hospital clowns. Clowning helps patients to focus on something other than their illness. Olsson et al. and Spitzer suggested that clown care could create a warm climate, promote good interpersonal relationships, and relieve feelings of frustration, anxiety, or hostility. Hospital clowns work worldwide as a health humanization resort, providing interplay with patients, family and staff creating a positive emotional state that fosters affirmative environmental conditions. This type of activity varies greatly in terms of professionalism, accountability and artistic methods. Promotion of emotional and psychosocial well-being of patients transcends opportunities for oral health promotion activities in hospitals, schools and community. Previous research reports on clown training reflects attitude-building potential for the healthcare students provided that it is performed in a deep, essential, strict and continuous fashion in a facultative manner rather than mandatory allowing the student to build his own artistic, professional and personal path. Thus, the prospect of introducing training curriculum of this underrated non-technical skill for dental students in Indian dental education system needs to be harnessed.
Bruxism: Its multiple causes and its effects on Dental Implants: A Review
Published on: 12th May, 2017
OCLC Number/Unique Identifier: 7286350944
The rehabilitation of partially or completely edentulous patients with implant supported prostheses has been widely used, achieving high success rates. However, many studies consider the presence of bruxism as a contraindication for this treatment modality. The purpose of this study was to review the literature and identify risk factors in implant supported rehabilitation planning in subjects with bruxism. The rehabilitation of bruxers using implant supported prostheses, using implants with adequate length and diameter, as well as proper positioning, seems to be a reliable treatment with reduced risks of failure. Bruxism control through the use of a night guard by rigid occlusal stabilization appliance, relieved in the region of implants, is highly indicated. Although it is clear that implant supported rehabilitation of patients with bruxism requires adequate planning and follow-up, well-designed randomized controlled trials are needed to provide reliable evidence on the long-term success of this treatment modality.
Esthetic recovery of permanent Mandibular Lateral Incisor using biological post after non-surgical healing of Periradicular Lesion: A Case Report
Published on: 22nd June, 2017
OCLC Number/Unique Identifier: 7286353205
Statement of the problem: Anterior tooth fracture, as a result of traumatic injuries, frequently occurs in dentistry. This leads to necrosis of pulp and periapical pathology. The goal of endodontic and restorative dentistry is to retain natural teeth with maximum function and pleasing esthetics.
Purpose of the study: This study aimed at proper reconstruction of extensively damaged teeth through the procedure known as “Biological Restoration.”
Materials and methods: Biological post obtained through natural, extracted teeth from another individual represents a low-cost option and alternative technique for the morphofunctional recovery of damaged anterior teeth that provides highly functional and esthetic outcomes.
Conclusions: This case report refers to the esthetics and functional recovery of mandibular left lateral incisor after non-surgical healing of periradicular lesion.
Enamel demineralization with resin modified gic and conventional composite resin - a comparative in vivo study
Published on: 31st July, 2017
OCLC Number/Unique Identifier: 7286352515
Background & Objectives: Fluoride releasing bonding agents can help the orthodontist to minimize enamel demineralization independent of patient cooperation. This in vivo study was conducted to evaluate the efficacy of resin modified glass ionomer cement (RMGIC) on reducing enamel demineralization around orthodontic brackets and confirm the superior caries-preventive effect of RMGIC by assessing the mutans streptococci (S. mutans) in plaque samples in vitro.
Methods: 60 subjects (aged 14-20 years) scheduled to have premolar extractions as part of the orthodontic treatment plan were selected and randomly divided into 2 groups of 30 each (group 1: the brackets were bonded on the teeth using light cure composite resin and group 2: the brackets were bonded using RMGIC). Plaque scores (modification of plaque index by Silness and Loe) were recorded and plaque samples were collected before bonding, one week and one month after bonding. S.mutans colonies were recorded from the plaque samples inoculated on MSB agar plates, incubated under 95% N2 and 5% CO2 for 48 hours at 370C in a CO2 jar. After 1 month, the right maxillary and mandibular first premolars were debonded, extracted and depth of enamel demineralization area was estimated using polarized light microscope.
Results: After statistical analysis, a significantly higher mean depth of demineralized lesions was noticed in group 1 as compared to group 2. A significant difference between occlusal and gingival depth was seen only in group 2, thus illustrating a wedge effect. In group 1, a statistically significant increase in the mean colony forming units (CFU) of S.mutans has been noticed at different time intervals whereas in group2, a significant increase was observed only at 1month. Unlike at 1 month, a statistically significant difference in mean CFU between group 1 and group 2 has been observed at 1 week (P<0.05).
Conclusions: Enamel lesions adjacent to the bracket base on teeth bonded with the RMGIC were smaller than those on teeth bonded with a composite resin. The high “burst effect” of fluoride release for the first few days of RMGIC after bonding is confirmed by statistically significant reduction in CFU counts of S. mutans in plaque.
Low Level Light Therapy (LLLT): Penetration and Photobiomodulation
Published on: 31st July, 2017
OCLC Number/Unique Identifier: 7286425855
Mester et al., stated the laser effects in a review of their studies of 15 various biological systems, they observed the stimulating effect of low energy (in terms of J/cm2) laser and inhibiting effect of high energy laser and later reported the relationship of cumulative energy applied and the effects conforms to the Arndt-Schultz law. They concluded their experience with 875 healed cases and the results of their experiments had convinced them to recommend the use of lasers to stimulate wound healing [1].
Osteogenic Accelerated OrthodonticsTM for treatment of a Skeletal Class II patient with moderate crowding
Published on: 18th September, 2017
OCLC Number/Unique Identifier: 7286353388
Introduction: A 17 years old male patient was treated at the University orthodontic department. He had the chief complaint of unaesthetic appearance of his teeth, mostly for anterior crowding. The pretreatment records showed a Class II skeletal relation, moderate upper and lower anterior crowding, 0.5mm of overbite and 2mm of overjet.
Materials and Methods: It was suggested Osteogenic Accelerated Orthodontics (OAOTM), the treatment option was very attractive to the patient although it required a surgical procedure and a more expensive type of treatment.
Results: The overall treatment time was 6 months, facial balance was improved and the final occlusal relationships from the functional and aesthetics perspective were good.
Conclusion: OAOTM is a good alternative to reduce extractions rate as it increases the scope of tooth movement and strengthen the periodontal tissues thru bone grafting, although these claims require more scientific data to be validated.
Drawings as learning aid for the human anatomy students’ based evaluation
Published on: 5th October, 2017
OCLC Number/Unique Identifier: 7286428771
Introduction: One of the essential requirements for efficient oral and maxillofacial surgeon is comprehensive knowledge in anatomy of head and neck regions. Authors believe that asking students to draw anatomical sketches will assist them to improve their imaginary memory for human anatomy. However, drawing, as learning aid in anatomy, has not been given enough attention as a learning aid for human anatomy.
Aim of the study: To determine dental students’ level of appreciation to drawings as practical learning aid in human anatomy.
Materials and methods: Seventy nine first year dental students in Ibn Sina University for Medical and Pharmaceutical Sciences College of Dentistry for the academic year 2016-2017, were requested to complete a questionnaire. The questions were mostly related to the importance of drawing in anatomy and its relation to Anatomy education. The participation in the questionnaire was optional.
Results: This study showed highly significant relationship between the ability to understand anatomy subject and the importance of drawing (P=0.006). It also showed highly significant relationship between the importance of drawings and giving clinical examples during lectures or anatomical labs (P=0.006). Furthermore, the results showed no significant relationship between the importance of drawings and the load of anatomical material, introduced in anatomical lectures and labs (P=0.639).
Conclusion: Anatomical drawings, from first year dental students’ perspective, are a useful learning tool and can relate to different aspects of proper education of human anatomy. Drawings can be implemented as practical tool in human anatomy curriculum for undergraduate dental education.
Corticotomy facilitated correction of skeletal class II malocclusion
Published on: 26th October, 2017
OCLC Number/Unique Identifier: 7379412270
Selective alveolar decortication and periodontal augmentation with a bone graft were the two procedures used for the correction of the skeletal class II malocclusion in the case reported. A 25-year-old male patient presented with a skeletal class II malocclusion with increased bi-maxillary dento-alveolar protrusion, increased overjet, deep bite and imbricated and rotated mandibular incisors with bilateral presence of supernumerary teeth in the maxillary right and left premolar regions. Extraction of supernumerary in the maxillary right and left premolar region, and impacted UL5 was done. Pre-adjusted edgewise appliance, Roth’s prescription (0.022x0.028-inch slot), was bonded and a week later full thickness labial and lingual flaps were reflected in the maxillary and mandibular arches. Circumscribed corticotomy cuts was done and subsequently augmented with a bone graft. Orthodontic treatment was commenced immediately after surgery and orthodontic adjustments were performed every 2 weeks. The entire orthodontic treatment was completed in 9 months. Regional acceleratory phenomenon, triggered by the alveolar decortication, was responsible for the rapid correction of the malocclusion and the augmentation with the bone graft provided adequate bone volume for housing the teeth, thereby decreasing the possibility of subsequent relapse.
Assessment of Oral Hygiene awareness in Geriatric patients attending OPD at ESIC Dental College, Rohini, New Delhi
Published on: 2nd November, 2017
OCLC Number/Unique Identifier: 7379483324
Aim: To assess and learn oral health awareness and hygiene practices among geriatric patients and also to identify important barriers in the establishment of oral health services, disease prevention and oral health promotion programmes for the same.
Materials and Methods: A total of 500 patients in the age group of 50 years and above were selected using random sampling technique. A self‑administered structured questionnaire including 20 multiple choice questions was given to them. The results were analyzed using percentage.
Results: The result of this study shows an acute lack of oral hygiene awareness and limited knowledge of oral hygiene practices. In Rohini, few people use tooth brush.
Conclusions: Hence, there is an urgent need for comprehensive educational programs to promote good oral health and impart education about correct oral hygiene practices.
Search by University/Institution
Enter your University/Institution to find colleagues at HSPI.
Ensuring author's satisfaction with
- Friendly and hassle-free publication process
- Less production time of articles
- Constructive peer-review
- Enhancing journal reputation
- Regular feedback system
- Quick response to authors' queries
Most Viewed Keywords
Search Articles by Country
Get all latest articles in all Heighten Science Publications Inc journals by country.
Testmonials
"This is my first time publishing with the journal/publisher. I am impressed at the promptness of the publishing staff and the professionalism displayed. Thank you for encouraging young researchers li...
Ekiti State University, Nigeria
Adebukola Ajite
I would like to thank this journal for publishing my Research Article. Something I really appreciate about this journal is, they did not take much time from the day of Submission to the publishing dat...
Ayush Chandra
I like the quality of the print & overall service. The paper looks quite impressive. Hope this will attract interested readers. All of you have our best wishes for continued success.
Arshad Khan
Once I submitted the manuscript, the response time of the reviewers was very fast. The fine-tuning of the galley proof was likewise prompt. I believe the journal provide a valuable outlet to dissemina...
Alon
I would like to mention that I had a wonderful experience working with HSPI. The whole process right from manuscript submission to peer review till the publication of the article was very prompt & eff...
Amarjeet Gambhir
We really appreciate your efforts towards our article, the professional way you handle our request for exemption from charges. It was a great honor for us to publish in your magazine.
Achraf elbakkaly
Publishing with the International Journal of Clinical and Experimental Ophthalmology was a rewarding experience as review process was thorough and brisk. Their visibility online is second to none as...
Elizabeth Awoyesuku
I do appreciate for your service including submission, analysis, review, editorial and publishing process. I believe these esteemed journal enlighten the science with its high-quality personel.
Bora Uysal
I am glad to submit the article to Heighten Science Publications as it has a very smooth and fast peer-review process, which enables the researchers to communicate their work on time.
Anupam M
Great, We are too comfortable with the process including the peer review process and quality. But, the journal should be indexed in different databases such scopus.
Afework Edmealem
