An experimental study on effects of fluoridated water on Abelmoschus esculentus var. Soh-198 (Lady Finger) Arshi Iram*
Published on: 23rd March, 2021
OCLC Number/Unique Identifier: 8983555712
An experimental study of fluoride (F) accumulation in Abelmoschus esculentus var. Soh-198 and its effect on the growth and crop yield was conducted in a pot experiment. Eight different concentrations of F in the water were used for irrigation ranging from 2 to 14 ppm with distilled water as the control. Potentiometric determinations of the F content in different parts of the plant were made 45, 60, and 120 days after sowing the seeds (first, second, and third harvest, respectively). At the third harvest the highest mean plant part concentrations of F were recorded with 14 ppm F in the irrigation water: 9.0638 mg/kg in the roots, 5.6896 mg/kg in shoot, 4.5348 mg/kg in leaf and 3.563 mg/kg in fruit.
Bioaccumulation of As, Cd, Cr, Cu, Pb, Zn in Ambrosia artemisiifolia L. in the polluted area by enterprise for the production and processing of batteries
Published on: 13th July, 2022
OCLC Number/Unique Identifier: 9575035815
In this paper, the concentration of As, Cd, Cr, Cu, Pb, and Zn was investigated in soil and Ambrosia artemisiifolia L. sampling from polluted cite near the enterprises for the production and processing of batteries in the city of Dnipro in Ukraine. The obtained results of the study were provided to assess the plant species through bio-monitoring and phytoremediation. Though Ambrosia artemisiifolia L. is a weed that causes serious allergic reactions in humans, this plant species can also have a high bioaccumulative capacity regarding metals. The obtained results highlighted the metals’ significantly higher concentration in roots than in the inflorescence part in Ambrosia artemisiifolia L. Among all studied metals, Zn and Cu had the highest concentration in Ambrosia artemisiifolia L., while lead was characterized by the highest bioavailable content available to plant forms in the soil. The various distribution of As, Cd, Cr, Cu, Pb, and Zn was found in different parts of the plant. According to plant-up-taking indexes studied elements can be ranked in the following descending order: Cu > Zn > Cr > Cd > Pb. Ambrosia artemisiifolia L. could be proposed for phytoremediation in Zn, Cu, Cd, and Cr contaminated soils although this species is resistant to lead soil pollution.
Rapid determination of PCDDs, PCDFs and DL-PCBs in foods, feeding stuffs and vegetable oils using new modified acid silica
Published on: 5th January, 2023
Polychlorinated dibenzo-p-dioxins, dibenzofurans and dioxin-like polychlorinated biphenyls are persistent organic pollutants (POPs), which in recent years received huge attention due to their extreme stability, high potential toxicity and bioaccumulation in food chains. The main source of human exposure to these compounds is discovered in foods of animal origin, especially foods rich in fat. The target of the present study was to set up an analytical method for the determination of PCDDs/PCDFs and DL-PCB in vegetable oils, sunflower meals, sunflower seeds, rapeseeds and milk powder. The first step consisted of a semi-automatic Soxhlet extraction for 3 hours, by using a mixture of Hexane: Acetone – 80:20, followed by acid digestion with 55% acid silica and filtration. After concentration, the extract is purified on a multilayer column (silica gel, silica-KOH, silica-H2SO4 anhydrous Na2SO4) followed by an alumina column separation in two fractions (first fraction containing PCDDs/PCDFs and second containing only PCBs). The purified extract was then analyzed by GC/MS/MS. The newly developed approach in our lab was capable to reduce the overall time of sample preparation to seven hours/ per sample. Since the method shows good mean recoveries for all labeled congeners spiked in the samples (for PCDDs/PCDFs – 80% - 110%, for DL-PCBs – 70% - 85%), we assumed the absence of overestimation or underestimation in the analyzed samples.
Study of kabul river canal sediments for heavy metals status and its accumulation in wheat plant (triticum aestivum)
Published on: 21st April, 2023
Canal cleaning is a routine activity on the canals diverted from the Kabul River. As a result, thousands of tons of sediment are removed as sludge and flushed back into the Kabul River. In Peshawar city, most people use this sediment as a soil conditioner in lawns. But the farmers are hesitant to apply it in agricultural fields. It is perceived that the sediment may be rich in heavy metal contents and, if used as a soil conditioner, may contaminate the food chain. To unveil the facts, this study was conducted with the aim of analyzing sediment samples for selected heavy metals and their uptake and accumulation in different parts of the wheat plant. For this purpose, the sediment collected from Warsak Gravity Canal (WGC) was analyzed for total essential heavy metals including iron (Fe), copper (Cu), cobalt (Co), manganese (Mn), and Zinc (Zn). Wheat crop was grown in four different pots consisting of pure soil, pure sediment, and two amendments i.e. soil mixed with 25% and 50% sediments. In comparison to sediment, the soil samples were high in copper, cobalt, and Zinc concentration. The concentration of iron and manganese was comparatively high in pure sediment but within permissible limits. The heavy metals uptake by the wheat crop was also within the permissible limits. The highest accumulation of copper, iron, and Zinc was observed in the roots of wheat plants. The highest value of cobalt was observed in the seed (0.407 mg Kg-1), which was within the safe range. Therefore, it is concluded that the sediment of the Kabul River canal cannot be considered a source of pollution in terms of heavy metals and can be used as a soil conditioner.
Evaluation of Heavy Metals Concentration in Poultry Feed and Poultry Products
Published on: 11th July, 2023
The study was conducted to determine the absorption of essential and non-essential trace minerals from poultry feed to poultry products. Poultry feed, liver, muscles, and egg samples were collected from six poultry farms in Rawalpindi and Islamabad. Mercury, Lead, Cadmium, Chromium, and Iron were analyzed in the samples using Inductively Coupled Plasma Optical Emission Spectrophotometer. Iron, Lead, and Chromium exceeded the permissible limits set by World Health Organization and National Research Council in Poultry feed. Lead was high in the liver, breast muscles, thigh muscles, egg albumen, and egg yolk. Chromium was found in feed, egg yolk, egg albumen, and two (02) of the liver and breast muscle samples. Mercury was not detected in any of the samples. The liver contains significantly higher concentrations of detected heavy metals as compared to thigh and breast muscles and egg yolk contained significantly high concentrations of Iron, Cadmium, and Lead as compared to egg albumen. Standards requirements for feed manufacturers and poultry farmers should be maintained to monitor and mitigate routes of entry of contaminants in the food chain.
Effect of Pesticides on Human Health
Published on: 14th August, 2023
The demand for pesticides has increased in today’s world of expanding population in order to boost crop productivity and eliminate undesirable plants (weeds) that grow alongside the primary crop. Along with the various benefits, it is also used in animal farms to get rid of pests. This has an impact not only on humans but also on animals and the environment. The usage of pesticides has increased, and occasionally some of them linger in the food products they are applied to, a condition known as pesticide residue. This residue is linked to human health and can result in a variety of diseases and disorders. In the current environment, even pesticides that are marketed as benign have negative long-term effects and exacerbate issues like bioaccumulation and bio-magnification. To avoid food contamination with pesticides, different methods like crop rotation, organic farming, and integrated pest management should be used as alternatives. Today, it is essential for all pesticide users to be aware of the risk and proper handling of these pesticides. New methods of pest management should be fostered in the realm of development.
Search by University/Institution
Enter your University/Institution to find colleagues at HSPI.
Ensuring author's satisfaction with
- Friendly and hassle-free publication process
- Less production time of articles
- Constructive peer-review
- Enhancing journal reputation
- Regular feedback system
- Quick response to authors' queries
Most Viewed Keywords
- Timely initiation
- Scientific work
- Injuries
- Morbid obesity
- Prevalence
- Preterm premature rupture of membranes
- Clown
- Brain metastasis
- Threats
- Valve replacement
- Feet
- CCHD
- Electrocardiography
- Anomalies of coronary artery origin
- Exciton coupling
- Hepatitis B
- Exposition
- Alcohol use
- Inflammation
- Prostate gland
Search Articles by Country
Get all latest articles in all Heighten Science Publications Inc journals by country.
Testmonials
The submission is very easy and the time from submission to response from the reviewers is short. Correspondence with the journal is nice and rapid.
Catrin Henriksson
Journal of Pulmonary and Respiratory Research is good journal for respiratory research purposes. It takes 2-3 weeks maximum for review of the manuscript to get published and any corrections to be made in the manuscript. It needs good articles and studies to get publish in the respiratory medicine. I am really glad that this journal editors helped me to get my case report published.
Divya Khanduja
This is to specify that I have had an extensive and detailed interaction with the Editorial team of Annals of Clinical Gastroenterology and Hepatology, USA, lasting over a significant period of time. My interaction has been extremely pleasant, especially with Ms Allie Smith, as I find the communication quite inspiring and crystal clear. The attitude of aforesaid individuals is quite helpful and guiding in pertinent instances. It has been a commemorative journey so far working with the Journal and I hope that the symbiosis will continue, evolve and flourish in the forthcoming years. I wish the journal, related personnel and aforementioned individuals a fruitful, successful run.
New Delhi, India
Anubha Bajaj
The Clinical Journal of Obstetrics and Gynecology is an open access journal focused on scientific knowledge publication with emphasis laid on the fields of Gynecology and Obstetrics. Their services toward us have been encouraging through their kindness and respect. Great consideration has been given to us as young budding researchers and we are very grateful for this.
Carole Assontsa
I am glad to submit the article to Heighten Science Publications as it has a very smooth and fast peer-review process, which enables the researchers to communicate their work on time.
Anupam M
Many thanks for publishing my article in your great journal and the friendly and hassle-free publication process, the constructive peer-review, the regular feedback system, and the Quick response to any queries.
Azab Elsayed Azab
During the process your positive communication, prompt feedback and professional approach is very highly appreciated. We would like to thank you very much for your support.
Can Vuran
Your service is very good and fast reply, also your service understand our situation and support us to publication our articles.
Ayman M Abu Mustafa
I wanna to thank Clinical Journal of Nursing Care and Practice for its effort to review and publish my manuscript. This is reputable journal. Thank you!
Atsedemariam Andualem
Great, We are too comfortable with the process including the peer review process and quality. But, the journal should be indexed in different databases such scopus.
Afework Edmealem
HSPI: We're glad you're here. Please click "create a new Query" if you are a new visitor to our website and need further information from us.
If you are already a member of our network and need to keep track of any developments regarding a question you have already submitted, click "take me to my Query."