Objectives: To evaluate the colour stability of 3 recently developed resin based materials continuously exposed to various staining agents. Methods: 144 disc-shaped specimens were made of each of the 3 tested composites (Essentia, Brillant, Inspiro). Half of them were of 1mm thickness, the other half 1.2mm thickness. The thicker group was than polished up to 4000 grit and reduced to 1mm thickness, too. All specimens after 24 h dry storage in an incubator (INP-500, Memmert), received an initial colour measurement by means of a calibrated reflectance spectrophotometer (SpectroShade, MHT, Niederhasli, Switzerland). Specimens were then divided into 6 groups (n=6) and immersed in 5 staining solutions or artificial saliva (control). All specimens were kept in an incubator at 37°C for 28 days. Staining solutions (red wine, curry mixed water, curry mixed oil, tea and coffee) were changed every 7th day to avoid bacteria or yeast contamination. After 28 days of storage spectrophotometric measurements were repeated and L*a*b* scores once more recorded to determine the colour (ΔE00) changes. Results: All tested materials showed significant color changes after 28 days staining immersion. When considered over a black background ΔE00 of polished samples varied from 1.7 (Brillant/distilled water) to 24.1 (Brillant/wine). When considered over a white background ΔE00 of polished samples varied from 1.1 (Essentia/distilled water) to 32.5 (Inspiro/wine). When considered over a black background ΔE00 of unpolished samples varied from 1.1 (Essentia, Inspiro/distilled water) to 25.8 (Essentia/wine). When considered over a white background ΔE00 of unpolished samples varied from 1.4(Inspiro/distilled water) to 33.1 (Inspiro/wine). Conclusions: Staining of restorative materials seems to be dependent on the composition of the product itself. Unpolished samples demonstrated to be more prone to staining than the polished ones

Background: An infectious disease caused by a novel coronavirus called COVID-19 has raged across the world since December 2019. The novel coronavirus first appeared in Wuhan, China, and quickly spread to Asia and now many countries around the world are affected by the epidemic. The deaths of many patients, including medical staff, caused social panic, media attention, and high attention from governments and world organizations. Today, with the joint efforts of the government, the doctors and all walks of life, the epidemic in Hubei Province has been brought under control, preventing its spread from affecting the lives of the people. Because of its rapid spread and serious consequences, this sudden novel coronary pneumonia epidemic has become an important social hot spot event. Through the analysis of the novel coronary pneumonia epidemic situation, we can also have a better understanding of sudden infectious diseases in the future, so that we can take more effective response measures, establish a truly predictable and provide reliable and sufficient information for prevention and control model. Methods: We establish different models according to the different developments of the epidemic situation, different time points, and different response measures taken by the government. To be specific, during the period of 2020.1.23-2020.2.7, the traditional SIR model is adopted; during the period of 2020.2.8-2020.3.30, according to the scientific research results, it was considered that the novel coronary pneumonia has a latent period, so in the later phase of epidemic development, the government has effectively isolated patients, thus we adopt the SEIQR model accordingly. During the period of 2020.3.31-2020.5.16, because more asymptomatic infected people were found, we use the SEIQLR model to fit. Finally, through a SEIR simulator, considering the susceptible number, the latent number, the infected number, the cured number, death number and other factors, we simulate the change of various numbers of people from the beginning to the next 180 days of novel coronary pneumonia. Findings: The results based on the analysis of differential equations and kinetic models show that through the prediction of the model established in the first phase, the epidemic situation of novel coronary pneumonia in Hubei Province was controlled at the end of March, which is in line with the actual situation. The rest of Hubei province, except for Wuhan, lifted control of the departure channel from 0:00 am on March 25, and Wuhan was also unblocked on April 8. Through the establishment of the second-phase model, it is found that the epidemic situation will reach its peak in mid-February. For example, the quarantine admission of the hospital declined after mid-February, which is inseparable from the measures to build square cabin hospitals in early February so that more and more patients can be admitted. The model established in the third phase shows that the epidemic had been completely controlled by the end of May, which is also in line with the reality. Because in mid-May, the Wuhan government conducted a nucleic acid test on all the citizens to screen for asymptomatic infected persons to fundamentally control the spread of novel coronary pneumonia. Interpretation: Hubei Province, as the center of the initial outbreak of novel coronary pneumonia, people were forced to be isolated at home during the Spring Festival, the most important Chinese holiday, and the whole society was in a state of suspension of work and study. The Chinese government had taken many measures in response to the epidemic, such as shutting down the city, vigorously building square cabin hospitals, and prohibiting people from gathering. At the beginning of May this year, the epidemic in Hubei Province was finally effectively controlled. For ordinary citizens, we should not cause unnecessary panic about the unknown novel coronavirus. Instead, we should fully understand and be familiar with this virus. In addition to the relevant medical knowledge, we should also understand the spread of infectious diseases through appropriate mathematical models. By mathematical models, we can understand the degree of harm of infectious diseases, when to control it, how to stop it, and use scientific views to reveal the original face of the novel coronavirus to the public without causing social panic.

The bio-energy released by the hydrolysis of adenosine triphosphate, which relate to plenty of life activities and is transported in a solution, and its theory of transport are first stated and built in helix protein molecule. In order to confirm and verify the correctness of the transported theory we here systematically summarized and reviewed a great number of experimental investigation and evidences obtained by us and other researchers in past 30 years, involving the real existences of the solution and its features and lifetimes. In this survey we outlined and presented concretely the features of infrared spectra of absorption, Raman spectra and specific heat of the molecular crystal-acetanilide collagen, bivine serum albumin, myoglobin proteins and E.Coli. cell as well as the lifetimes of the solution in acetanilide and myoglobin measured by using pump-probe techniques and free-electron laser experiment, in which we give not only experimental data but also their comparisons with theoretical results. These experimental data and evidences provided here are enough to verify and affirm the true existences of the new solution, which can complete itself functions of bio-energy transport in the lifetime, and the correctness of the new theory of bio-energy transport in the acetanilide and protein molecule. Thus we can affirm the correctness of theory of the bio-energy transport in helix protein molecule, which can greatly promote the development of molecular biology.

ATPases is known to be a crucial in many biological activities of organisms. In this study, physicochemical properties and modeling of ATPases protein of fish was analysed using In silico approach. ATPases a protein selected from fish species, including Gold fish (Carassius auratus auratus), Zebra fish (Hypancistrus zebra), White fishes (Coregonus autumnalis), Grass carp (Ctenopharyngodon idella) and Anabas testudineus (Koi) were used in this study. Physicochemical characteristics showed with molecular weight (25045.58-25148.57Da), theoretical isoelectric point (9.30-9.97), extinction coefficient(26470-34950), aliphatic index(147.31-150.35), instability index(32.84-42.67), total number of negatively charged residues and positively charged residues (5/7-6/8), and grand average of hydropathicity (1.014-1.151) were computed. All proteins were classified as transmembrane proteins. In secondary structure prediction, all proteins were composed of random coils as predominant, followed by extended strands, alpha helix and beta turn. Three dimensional structure of protein were predicted and verified as good structures. All model structures were evaluated being accepted and reliable based on structural evaluation and stereo chemical analysis.

Fructus Amomi is “one of the top four south authentic Traditional Chinese Plant Medicines”, widely distributed in tropical and subtropical districts of China, such as Fujian, Guangdong, Guangxi, Hainan, etc., which has ever been used in clinical for treatment of the digestive diseases. In addition, it has also been used as spices. In recent years, some research about its components together with pharmacological activities have been reported. In this Mini review, we mainly describe the recent progress of the components and pharmacological activities of Fructus Amomi, to provide the reference for the relevant researchers.

Direct bonding of a lingual retainer is challenging because it requires a long working time on the lingual aspect of the anterior teeth. Due to no direct vision there is a risk of contamination from saliva and moisture, which can cause bond failure; and it is difficult to apply the adhesive exactly where it is needed. The indirect method described in this article shows an easy way to increase better-quality bonding of the retainer

This review gives a brief introduction to the microarray technology and its experimental design and data analysis and a discussion of recent global progress in research using microarray technology in fish biology and aquaculture. DNA microarrays have been reported to have been used for the analysis of gene expression during various physiological, developmental or cellular processes in fish. During the recent past, investigators have begun to use microarrays on fish to address ecological, evolutionary and environmental questions including the variability of gene expression in natural populations, speciation, ecotype diversity, environmental remediation and host-pathogen interactions. The study suggests that a lot of gene expression studies have been conducted on salmon and zebrafish in Europe and USA. The same may be applied on Indian Major Carps and Catfishes to augment productivity from aquaculture sector. 

Protein functional annotation requires time and effort, while sequencing technologies are fast and cheap. For this reason, the development of software tools aimed at predicting protein function from sequences can help in protein annotation. In this paper, we describe how to use our recently implemented Bologna Annotation Resource (BAR) version 3.0, a tool based on over 30 million protein sequences for protein structural and functional annotation. In BAR 3.0, sequences are arranged in a similarity graph and then clustered together when they share at least 40% sequence identity over 90% of sequence alignment, for a total of 1,361,773 clusters. Protein sequences with known function transfer their annotation to other sequences in the same cluster after statistical validation. Sequences with unknown function and new sequences entering in a cluster inherit its statistically validated annotations. The method well compares to other techniques in the Critical Assessment of protein Function Annotation algorithms (CAFA). The CAFA experiment tests the performances of different predictors on a dataset that accumulates annotations over time. BAR predictions have been submitted to all the instances of CAFA through the years (BAR Plus in CAFA, BAR++ in CAFA2 and BAR 3.0 in CAFA3). The benchmarking indicates that in the field improvement is still possible and that our BAR scores among the top performing methods. This work focuses on how the tool can transfer statistically significant features to poorly annotated or new sequences derived from transcrptomics or proteomics experiments. 

Hemiscorpius lepturusis a dangerous scorpion and referred to health concern issue in Khuzestan, Iran. The venom of H.lepturus is cytotoxic and its effect is similar to spider Loxosceles reclusa. Metalloproteinases are the important class of enzymes in the venom that has hemorrhagic activity. The early finding suggests the existence of metalloproteases in the transcriptome of venom gland of H.lepturus. Phylogenetic analysis was accomplished to reveal the evolutionary relationship of identified metalloproteases. The phylogenetic tree was constructed by Molecular Evolutionary Genetics Analysis software and neighbor-joining method. Results showed among three sequences, two metalloproteinases named HLMP1 and HLMP3 of H.lepturus were most close to spider P. tepidariorum. The third sequence named HLMP2 was different and formed an independent clade in the phylogenetic tree. The results suggest that the sequence of metalloproteases in the venom component of H.lepturus is similar to the spider than the scorpion.

The neuromuscular disorders may be hereditary, autoimmune, and in some cases with unknown etiology. These diseases are characterized by progressive course, muscle weakness, and in an advanced stage with binding the patient to a wheelchair. This group includes a number of diseases, but from the dental perspective, the most interesting are muscular dystrophy, multiple sclerosis and myasthenia gravis. Neuromuscular disorders affect the oral cavity and the impact on oral hygiene procedures should be monitored with great attention.