act

Tyrosine kinase inhibitors (TKIs) are widely used in Oncology practice. Hypertension may develop during cancer treatment and TKIs are well known drugs that are associated with drug related hypertensive toxicity. TKI related hypertensive toxicity is not always the indicator of worse clinical outcomes and it may be the sign of treatment efficacy.

Objective: This study discusses strategies to overcome hypertension patient compliance to manage self-care. The purpose of the study is to provide a summary of the importance of attention to managing hypertension. Method: a review of literature relevant to hypertension, policies, and management, both pharmacological and non-pharmacological, through cross-programs or sectors. Result: This study found that the ministry of health had compiled various policies to reduce the prevalence of hypertension, including technical guidelines for its implementation, but the strategy has not yet fully reached the minimum service standard, which is because it has not fully involved the relevant cross sectors. Conclusion: Improve the coordination system by “Joint Decree” between the Ministry of Health and the Ministry of Villages, PDT and Transmigration, the Ministry of Social Affairs, Indonesian National Army, police, and NGOs to carry out activities simultaneously to the community.

NAFLD is characterized by accumulation of fat in the liver that can lead to health complications. Previous studies have found the obesity phenotype and its components to be risk factors for the development of NAFLD. This study aims to examine the relationship between the obesity phenotype and NAFLD among each racial-ethnic group. We analyzed data from the NHANES III survey (1988-1994). The obesity phenotype was defined based on BMI and metabolic syndrome. NAFLD was defined by abdominal ultrasounds among non-alcoholics with no infection or taking drugs affecting the liver. A higher prevalence of NAFLD was found among the metabolically unhealthy obese group (43.1%) and the metabolically unhealthy overweight (29.4%) than the metabolically unhealthy normal weight (11.8%). Mexicans-Americans had higher odds of NAFLD relative to whites (adjusted odds ratio (AOR) = 1.3, 95% confidence interval (CI) = 1.01-1.9, p = 0.04). The metabolically healthy obese phenotype was associated with NAFLD (p > 0.05) in the overall sample and in Whites. The metabolically healthy overweight was associated with NAFLD only among Mexican-American (p < 0.05). Metabolically unhealthy overweight or obese had higher odds of NAFLD relative to the metabolically healthy normal weight and this relation is consistent in all the racial/ethnic groups (p < 0.05). Metabolically healthy overweight and obese individuals had a high chance of NAFLD and it varied by race/ethnicity. Healthcare providers should pay more attention to care for those who are part of the metabolically healthy overweight or obese group especially among the Mexican-American population.

MgAl based layered double hydroxide (MgAl-LDH) was used as adsorbent for the removal of chromium oxyanion from an aqueous solution. MgAl-LDH was synthesized successfully using co-precipitation method, and was characterized by X-Ray Diffractometer (XRD), Scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX). MgAl-LDH was thermally treated for improving the chromium adsorption. Samples were treated at 220°C and 450°C. A negligible difference of total chromium adsorption capacities was observed between MgAl-LDH000 and MgAl-LDH220 as 12.56 mg/g and 11.01 mg/g. The maximum chromium adsorption capacity of MgAl-LDH was 88.07 mg/g at 500g/l chromium concentration for MgAl-LDH which has been thermally treated at 450°C (MgAl-LDH450). The results indicated that memory effects of thermally treated MgAl-LDH at certain temperatures were retained and enhanced chromium removal efficiency.

Introduction: Obesity defined as increased fatty mass is progressively rising in recently, even though its affects begins to all systems in childhood and adolescence periods, the most important morbidity and mortality reason of obesity is its effects on the cardiovascular system. Researches point out endothelial dysfunction and atherosclerosis as the reason of the cardiovascular system disease in obesity. The studies conducted on childhood period related to this subject are highly limited and the results of these are also controversial. Therefore in our study the effects of obesity on endothelial functions in children and adolescents was assessed by flow mediated dilation (FMD) method. In addition to that, effects of epidemiological, biochemical, hormonal and clinical features of cases to FMD were investigated. Material and method: A total number of 104 cases were cover in this study. Obese group (group 1) was consisted of 59 children whose body mass index (BMI) was ≥ 95th percentile and mean age was 12 ± 2.8 years old. The control group (group 2) consisted of 45 children whose body mass index (BMI) was between 25th -84th percentil and mean age was 11.4 ± 2.9 years old. The detailed history, epidemiological data and physical examination were performed. The population classified three groups according to sport activities. 97th percentile and higher values were accepted as morbid obesity. The blood pressure was measured with a mercury sphygmomanometer with utilizing the proper size cuff in compliance with the criterion used by the “National High Blood Pressure Education Program Working Group”. The complete blood count and biochemistry tests (renal and liver function tests, electrolytes, lipids, hsCRP) of the cases were analysed with biochemistry Roche Cobas Integra 800 and hormon assays of the cases (thyroid function tests, diurnal cortisol, ACTH, 17 OHP, prolactin, DHEA-S) were analysed by ECLIA method on Roche Elecsys 2010 device in the laboratory of our hospital. IR-HOMA values > 2.5 in prepuberal and > 4 in pubertal were defined as the insulin resistance. Bone ages of cases were evaluated with left hand wrist X-ray by using Greulich and Pyle Bone Age Atlas. flow mediated dilation (FMD) was used to assess the endothelial functions of all cases. The brachial artery was evaluated with SPG 12 MHz surface probes by using GE voluson ultrasound system in this method. FMD was expresses as percent (%) increase according to the basal vein dimension. 7% mean value was taken as the limit in the comparisons. Results: The ratio of male and female was 20/39 in group 1 and 14/31 in group 2. 32.3% of the cases in group 1 and 47.6% of the cases in group 2 were prepubertal. The waist and hip circumferences ratio of the group 1 (0.86 ± 0.05) was significantly higher than group 2 (0.80 ± 0.07). While there was no difference between groups 1 and 2 in terms of the birth weight, using duration period of vitamin D and beginning time to additional nutrition, breastfeeding duration of group 1 (10.6 ± 7.8 months) was significantly shorter than group 2 (14 ± 7.4 months). BMIs of the mothers in group 1 were statistically higher than the mothers in group 2 (27.5 ± 4.8 kg/m² and 24.3 ± 3.2 kg/m² respectively. The mean of IR-HOMA was 4 ± 2.9 in group 1 and 1.9 ± 0.8 in group 2 and there was the insulin resistance in 51% of the obese cases. The dyslipidemia was diagnosed in 38.5% of the cases in group 1. The systolic and diastolic blood pressures in group 1 (117 ± 12.2 mmHg and 73.7 ± 9.4 mmHg respectively) were significantly higher than in group 2 (107.5 ± 9.1 mmHg and 68.2 ± 7.1 mmHg respectively). Hypertension was determined in 25% of the cases included in group 1. The minimum values of FMD in groups 1 and 2 were 1.01% and 3.1% respectively. The maximum values of FMD in groups 1 and 2 were 9.7% and 15% respectively. The mean values of FMD was %5 ± 2.3 in group 1 and %8.1 ± 3.5 in group 2. Compared with group 2, group 1 demonstrated significantly impaired FMD. There was no association between FMD and the birth weight, breastfeeding duration, physical exercises in two groups. A negative correlation was found between FMD and BMI (p < 0.01, r = -0.402). The correlation was determined between FMD and BMI of the mother (p = 0.017, r = -0.305) and the presence of obese individuals in the family (p = 0.021, r =-0.413). It was found that a significant negative correlation between FMD and waist-hip circumference ratio (p = 0.003, r = -0.421). When each groups were assessed in terms of biochemical and hormonal characteristics, there was low negative correlation between FMD and uric acid level and strong negative correlation between FMD and ALT level were determined in group 1. Conclusion: In our study showed that the obesity begins in the childhood period may cause to the endothelial dysfunction. For this reason, according to our opinion, recognition prior indicators of endothelial dysfunction in early time may be helpful both to take the precautions required and to prevent cardiovascular complications in childhood and influences to the adult period. The rising sizes of the waist and hip circumferences, positive family history for obesity and obesity of the parents were determined as the most important parameters negative affecting FMD. Unlike the literature, the association between endothelial dysfunction and GGT level the indicator of the hepatosteatosis in obese children was also found as well as FMD and ALT have also a close association independent from BMI in this study. Thus, a different point of view was formed since ALT may possibly have a predictor value in the assessment of the endothelial functions and it is also found as a highlighted risk factors for the endothelial dysfunction in this study. Because of this reason, it can be recommended that when the liver function tests carry out in obese children it does not show only hepatosteatosis but also can be used as an early indicator of the cardiovascular complications of obesity. Another important subject to be emphasize that the ALT level in the childhood period may be an early cardiovascular risk indicator in both obese and nonobese children.

Background: The main cause of adrenal insufficiency (AI) in paediatric patients is prolonged treatment with corticosteroids. Determination of plasma cortisol (PC) during ACTH test is the most used adrenal function indicator in clinical practice. However, determination of salivary cortisol (SC), a simple test especially useful in children in order to avoid invasive procedures, can be used as an alternative technique for the diagnosis of adrenal disease. Methods: A two-year prospective study (January 2014-January 2016) in paediatric patients (2-18 years of age) treated with corticosteroids for more than fifteen days, who were investigated for suspected AI. Low-dose ACTH test was used to determine adrenal function and samples for SC and PC were obtained simultaneously in basal situation and during the test (at 30, 60 and 90 minutes). Results: 230 samples (118 PC-112 SC) of 30 studies belonging to 20 patients (4 males), mean age 10.93 years ± 3.69 SD. Pearson’s correlation coefficient showed a positive correlation between PC and SC (r = 0.618, p < 0.001). All the studies with some determination of PC higher than 18 μg/dL (n = 8) had a SC peak higher than 0.61 μg/dL with a specificity of 66.67% and a sensitivity of 93.94% (ROC analysis). Conclusion: Measurement of SC is a less invasive, easier and quicker test than PC to measure plasma free cortisol levels. In our study, a SC peak in low-dose ACTH test higher than 0.61 μg/dL was able to discriminate patients without AI, and proved to be a useful tool in the initial evaluation of children with suspected AI.Introduction The activation of the hypothalamic-pituitary-adrenal axis in response to critical illness and the resulting release of cortisol from the adrenal cortex are essential to stress adaptation. Adrenal insufficiency (AI) is described as the inability of adrenal glands to produce an appropriate hormonal secretion not only under stress but also in basal situation. Therefore, a low baseline plasma cortisol (PC) (< 5 μg/dL) and a poor cortisol response to stimulation with exogenous adrenocorticotropic hormone (peak < 18 μg/dL) are some of the defining criteria of this condition [1,2]. It is well known that the main cause of AI in paediatric patients is prolonged treatment with exogenous corticosteroids, which is an iatrogenic cause derived from the increasing complexity of paediatric pathologies and the increased use of prolonged high-dose corticosteroid therapy. In clinical practice, adrenal function is usually assessed by the total PC (determined by low-dose ACTH test). This implies the placement of a vascular access which is often a traumatic experience for children. PC includes protein-bound fraction and serum-free cortisol. The latter constitutes the biologically active form of the hormone and is responsible for glucocorticoid activity on peripheral organs. Most of the circulating cortisol is bound to plasma proteins (over 90%), such as cortisol-binding globulin (CBG) and albumin, whereas only about 10% of circulating cortisol is free. Hence, the measurement of plasma-free cortisol level has been considered more representative of adrenal function (especially in critically ill adults and children) [1,2], because some conditions, such as hypoalbuminaemia or hypoproteinaemia (frequent in critically ill patients or in patients with cirrhosis), may lead to misinterpretation of adrenal function with an overestimation of the prevalence of AI. But the direct measurement of free PC is a laboratory-dependent and time-consuming procedure that is not available for routine use. Salivary cortisol (SC) is one of the several indirect methods available to determine free PC [3], as SC levels accurately reflect free PC [4] even in cases of hypoalbuminaemia or CBG abnormality [1,5]. For this reason, in the last years, this technique (SC) has been introduced as a non-invasive tool in the diagnosis of adrenal cortical disorders, for its simplicity and applicability in the paediatric population. However, few studies to date have evaluated the usefulness of SC as a diagnostic method in children with AI. No interactions between exogenous corticoids and SC have been described [6]. The aim of the present study was to assess the usefulness of determining salivary cortisol levels as a diagnostic tool in children with suspected secondary iatrogenic AI. 

The actions exerted by waves on a coastal structure very much depend upon hydrodynamic processes that originate on shallow waters; even though significant progresses have been made in the last few years towards a full understanding of wave breaking, design work is still largely based on classical stability formulas. The recent availability of reliable models based on the numerical integration of full Navier-Stokes equations provides an important tool, but the evaluation of forces on vertical structures in shallow waters is still a particularly delicate application because of the complex hydrodynamic issues involved. The paper presents deals with the numerical simulation of wave effects on front of a vertical obstacle on a sloping bottom, with the objective of clarifying some physical issues which are relevant towards the applicability of numerical Navier-Stokes simulation as a design tool.

A preliminary laboratory study was conducted using upflow anaerobic sludge blanket (UASB) reactor to investigate the potential of methane generation from brewery wastewater. Brewery wastewater from a local brewery company was collected and used in the experiments. The experiments were run for 15 days. The rate of methane production was about 5.32 L per kg of chemical oxygen demand (COD) removed per day. The pH reduction in the experimental reactor limited the ability of gas production and is likely the result of the temperature at which the experiments were conducted.

Water resources play an integral part in the life of a living being. The various water resources that are present on the earth’s surface are in the form of oceans, seas, lakes, rivers, ponds, waterfalls etc. Among these water resources Lakes and reservoirs are vital for people’s life, industrial activities and many other day to day activities. These water resources help in obtaining water for drinking after being treated. They also provide water for agriculture and industrial usage, fishery resource, flood control functions and many other activities. Due to the closed nature of lakes’, the waste material from sewage, agricultural effluents, domestic and industrial fields, gets accumulated around the surface of these water resources and once the water gets polluted, it gets strenuous to improve the quality of the water. In the study, the authors have examined different effective ways by which the quality of lake water can be improved.

Bacteria has been known to grow in pipes of water distribution systems and bottled drinking water. Its growth in reusable drinking water bottles is not clear even though they have become more popular and used by children and adults daily everywhere. This study found that there is an extremely high level of bacteria content and a rapid microbial growth in reusable drinking water bottles. The bacteria content tested by heterotrophic plate count (HPC) is in a range of 0-2.4x105 CFU/mL with an average of about 34,000 bacteria counts/ml for bottles used by children and 75,000 bacteria counts/ml for bottles used by adults. Bacteria number can quickly increases to 1-2 million counts/ml in the bottles one day later. Considering the high level of HPC bacteria content in the reusable drinking water bottles, it may be necessary to have some control measures to reduce the bacteria level and to minimize the associated likely health risk of the disease spreading since many people use reusable water bottles every day. 

The paper presents and develops the issue of Cumulative Effect Assessment (CEA) in the Environmental Impact Assessment (EIA) screening procedure established by the State and Regional regulations In Italy. In the period 2001-15 in the territory of the Venice province (north east Italy, Veneto region) n. 328 projects (and the related environmental preliminary/definitive studies) were applied to competent Authorities (6% to the State, 39% to the Region and 55% to the Province). All the Environmental Impact Studies (EISs) and Environmental Preliminary Studies (EPSs) referring to the this territory officially applied to competent Authorities in the period 2001-2010, have been analysed with focus on the identification and assessment of cumulative effects (CEs); the projects considered and analysed for this purpose comprise a total of n. 181 EIA screening and ordinary procedures; the remaining 147 projects in the period 2011-15 (for a total of 328) are here considered only for statistical reason to an update assessment of project typologies in the same territory. The methodology applied for the analysis of the sample of environmental studies in the period 2001-10 refers to that presented by Cooper and Sheate (2002) with modifications. The investigation has been developed looking for the way in which the topic is performed by practitioners in the environmental studies as from qualitative as well as quantitative point of view. Specific attention has been paid to waste management plants which are always subject to EIA screening procedure since 2008 according to Directive 97/11/EEC and in case to the whole EIA procedure. The approach proposed by Lombardia Region (North Italy; 2010) for EIA screening procedure of waste management plants has been applied to identify CEs and modified according to the characteristics of the considered territory; it allows the performance of the project-based approach and must be completed with a regional-based approach (Dubè, 2003). The proposed approach can be useful in case of waste management and IPPC (Integrated Pollution Prevention and Control, Directive 96/61/EEC, amended with Directives 2008/1/EC and 2010/75/EU) plants to define the financial warranties required for the authorization of operative activity of the plants to cover potential environmental damages produced in cases of accidents and other conditions as required in Europe (art. 14 Directive 2004/35/EC on environmental liability). Several project categories were chosen and their EISs analysed as an exemplificative case according to the potential generation of cumulative impacts and the characteristics of the territory. With reference to the completed procedures where the competent Authority presented a final judgement, it has been observed that the CEA has been seldom developed due to not compulsory legal requirements as already observed by Burris and Canter (1997). Moreover, when it is considered, the methodology is limited and not systemized. Indices of impact have been identified according to emission for the main environmental components focussed with the analysis of the pressure factors of the plants. The study points out the need to analyse and evaluate the cumulative effects (CEs) at a strategic level (within the Strategic Environmental Assessment-SEA- procedure) with a view to preparing the study for EIA/EPS framework procedure for the projects derived from the corresponding plan/program. A sound knowledge of the considered territory and in particular of its pressure sources is of main importance for CEA assessment and impacts’ prevention. Geographic Information Sytesm (GIS) application is strongly needed for pressure sources’ census and control data storing

The Coal conveyor system forms an integral part in Thermal Power plant owing to the fact that the overall efficiency of the plant is dependent on the rate at which the coal is carried to the crusher unit. But, as of now, only manual labors are employed to regularly monitor the operation of conveyor system which is highly risky. Hence, by means of a Microcontroller like PIC makes the controlling process much easier. The flaws that occur in the conveyor system are mostly due to the temperature at which the coal is carried and also due to the attrition in the belt. By means of a Temperature sensor and an IR sensor this could be regularly monitored and during any abnormal situation, this initiate Cooling fan in case of high temperature and signals an alarm whenever there is any fault in the system.

Geosynthetics used in landfills provides a technical and economic advantages over traditional clay liners. It may create stability issue and even lead to landfill failure due to its low interface or internal shear strength if improperly designed and/or constructed. The most common failure mechanism in geosynthetic-lined landfills is transitional failure involving waste and bottom liner (deep-seated failure) or only final cover system (shallow failure). Shear strengths of geosynthetic-geosynthetic and geosynthetic-soil have a wide range of variations. Shear strengths of interface from literature may be used in preliminary design. For final design, site-specific interface shear strengths shall be used. Internal shear strengths of unreinforced geosynthetic clay liner (GCL) are less than those of reinforced GCLs. Unreinforced GCLs are not recommended for slopes steeper than 1:10 (1 Vertical and 10 Horizontal). Peak shear strength of interface and internal GCLs can be used in bottom liner; residual shear strength of interface and internal GCLs shall be used for geosynthetic placed along the slopes. Site-specific shear strengths of waste are recommended to be used in the design. Landfill failure could be triggered by static loadings including excessive leachate, pore pressure above the bottom liners, gas pressure, and excessive wetness of the geomembrane-GCL, and earthquake loading. The factor of safety of 1.5 is recommended for static loading and 1.0 for earthquake loading. A higher factor of safety is recommended if a failure could have a catastrophic effect on human health or the environment, and if large uncertainty exists in input parameters to calculate the factors of safety. The main objective of this review article is to provide a comprehensive knowledge of slope failure mechanisms, causes, and probable remedies in one place.

This study investigated the effect of Portland cement on stabilization of heavy metal contaminated clayey soils that may give range of geo environemntal benefits. The absolute concentration of heavy metals: Lead (Pb), Zinc (Zn), Chromium (Cr), Cadmium (Cd) and Copper (Cu) were measured using an inductively coupled plasma atomic emission spectroscopy (ICP-AES). A series of laboratory scale experiments such as unconfined compression test (UCT), pH test and synthetic precipitation leaching procedure (SPLP) were performed to study the effects of curing time and cement content on the unconfined compressive strength (UCS) and leaching characteristics of heavy metals. According to results, excessive concentration of heavy metals are present in the topsoil of Shanghai Jiao Tong University (SJTU) among which Pb, Zn and Cd were most prominent. Other test results showed that the dry density of both C4 and C8 soil samples increases with curing time. Similarly the compressive strength (qu)of C4 and C8 samples at 21 d of curing increases by 40% (113 kPa-288 kPa) and 15% (745kPa-864 kPa) respectively, as compared to the 7 d of curing. Besides, the test results showed a prominent decrease in the leached concentration of heavy metals with increasing curing time.

Annually the list of pesticides is replenished by new ones. One of the main criteria for their registration is toxicological and hygienic assessment and its impact on the environment. In order to register the new soy herbicide Damu - Safen, EC (fomesafen, 250 g/l) it was necessary to assess its toxicological and hygienic impact on the environment and humans. Therefore, for the first time we conducted studies of the environmental objects under the influence of Damu-Safen, EC (fomesafen, 250 g/l) and the risk assessment of the active substance fomesafen and pesticide Damu - Safen, EC on the workers. According to the results of the assessment of working conditions for the workers of the tanker and the tractor operator, an acceptable risk was obtained that meets regulatory and hygienic requirements. Residual amounts of fomesafen not exceeding the normative levels were found during conducted studies on environmental objects. Consequently, the results of the risk assessment in the application of pesticide Damu-Safen, EC (fomesafen, 250 g/l) and its impact on the working people and environmental objects indicate the possibility of its application in compliance with optimal environmental conditions and compliance with regulations for appliances and personal protective equipment.

The carried work has based on transient vibration response of multiple degrees of freedom (MDOF) system. By this work study of Time–history analysis and prediction of the displacement for excitation has done. For the MDOF system, we have taken the four-storey building to done transient vibration. We establish the equivalent spring-mass system. Transient analysis has done for both Undamped and Damped of the forced system of multiple degrees of freedom (MDOF) system. In the case of the Damped system, we have done three stages of damping, i.e., (1) Underdamped system, (2) Critically damped system, (3) Overdamped system. The time-history graph obtained for two different time stages i.e. 0.001 sec & 0.01 sec with initial time 0.000001 sec. The natural frequency has determined by both theoretical calculation and ANSYS. The whole study of transient vibration makes it possible to predict the damping values that oppose any kind of sudden impact or force vibration, such as blasts, earthquakes and tsunamis. The ANSYS is the modelling and simulation software is used to perform the transient vibration response. The Mode Superposition method is used by ANSYS to calculate the structure response

The analytical models are mainly combined with numerical equations for the problems of the pavement under the wheel load. Different assumptions can be considered, such as elastic asphalt and viscoelastic as well as static or dynamic load. Mainly on deformation at the bottom of asphalt and tension layers focus on subgrid. The pavement structure was considered as layers with uniform characteristics. Therefore, this analytical model calculates the three-dimensional contact tension between the wheel and the pavement and the shape of the contact area. Basis and subgrid are considered linear and the asphalt layers can be linear or viscoelastic. This model is based on the results of direct shear stress tests at an axial load constant. The curves obtained from this experiment can be defined by three parameters: the maximum shear stress (shear stress curve versus shear displacement), the interaction modulus between the layers (the same curve slope) and the friction coefficient after the failure. Due to the ability of ABACOUS software, this project is done with this software. One of the methods widely used to predict viscoelastic responses of asphalt mixtures is the finite element method. ABAQUS software is one of the tools that can simulate mixed asphalt behavior based on a finite element method, taking into account all the determinant parameters. The use of the Prony series is one of the common techniques for describing the viscoelastic behavior of asphalt mixtures in ABAQUS software. For this purpose, it is necessary to determine the parameters required for this field, including proven constants, moment elastic modulus, and asphalt mixture poison ratio. On the other hand, the determination of these parameters through testing in addition to spending time and costs requires laboratory equipment. Therefore, in this thesis, a three-dimensional finite element model with ABAQUS software was constructed to analyze the persistent pavement using theoretical relations without conducting the experiment. Also, viscoelastic behavior of common asphalt mixtures and time dependence of its responses at different temperatures can be modeled in ABAQUS software. After performing the shear stress test for different axial loads, different temperatures, with or without a single coil, they found that all parameters are temperature dependent and the coefficient of friction does not depend on the applied axial load. This new model improves the accuracy of the finite element model and its important role can be an analytic expression that includes all the variables that are effective in the problem.

Assuming that the road infrastructure has been implemented in accordance with specifications and standards, poor adhesion between the two layers of asphalt mix can be a significant cause of pavement problems. The general problem observed with the weak adhesion between the layers is the slip failure. Slipping disruption in areas where transport acceleration increases, in areas where acceleration decreases or may occur in bumps. One of the criteria and a test method for measuring adhesion resistance between the hot mix asphalt layers is needed to improve the surface finish. The main objective of this study is to determine the effect of reducing the coefficient of friction between asphalt layers in the displacement of asphaltic layers. Because performing experimental experiments in the country is a deterrent to this goal, the use of analytical and numerical methods has been shown to play an important role in conducting studies. Therefore, in this paper, using vehicle simulation in ABAQUS software and analyzes, it has been found that decreasing the coefficient of friction (adhesion reduction) increases the interlayer deformation, which causes the surface of the pavement to fail. Three different thicknesses for asphalt cladding, including 4, 6, and 7 centimeters, and three different thicknesses for roller concrete layers of 18, 20 and 22 centimeters are used. Modeling and analysis of pavements with finite element method has been performed and the depth of the asphalt and tensile strain slope is calculated at the maximum level. The results show that the type of asphalt mix has a high impact on the amount of sloping and tensile strain at the maximum level. So that under different conditions it is estimated to be about 2-3 times in the amount of rotation at the surface. Also, the amount of groove and strain in the middle of the procedure is increased by a thickness of 11% the thickness of the roller concrete thickness has not changed, but the surface strain has been reduced by 9%.

For over twenty years, following the creation of space stations, MIR first and then the ISS (International Space Station) men (3 to 6) live and succeed each other continuously about 300 - 400 km of altitude to make scientific experiments. For this reason sending men into space has become an activity “almost banal or regular “but this remains potentially a very dangerous environment for the adapted manon Earth and thus requires medical monitoring to ensure the health of astronauts and the persistence of their ability during their mission. In general, the medical benefits on Earth of space conquest go far beyond envy and the need for man to discover the cosmos but to develop many tools medicines to also offer solutions for all living beings on Earth!

The article discusses approaches to solving problems of accurately determining strength in kinematic pairs. It is known that the nature of the bonds imposed by kinematic pairs is determined by the geometric shapes of the elements of the pairs. For what, here, the bonds acted during the entire time the mechanism was moving, so that the elements of the kinematic pairs would continuously touch each other. Where it is recognized that one of the simplest methods for taking into account the inertia of a link is the principal moment method. How the contradiction is sought is here because the normal acceleration has a direction opposite because normal acceleration has a direction opposite to the link (directed toward the center), and the image of tangential acceleration is directed parallel to this acceleration. The following simplification can be made if the main vector of inertia is considered together with the weight of the link.