Most Viewed Articles

Sawdust is a by-product or waste product of woodworking such as cutting, sanding, machining, planning, and routing. Saw dust consists of small woodcutting intending to study the structural morphology of organic waste fiber derived in an X-band frequency and synthesis of the rice dust and sawdust. The solid-state method was employed to mix the husk, to obtain the fine power, and the Fourier-transform infrared spectroscope was used to determine the sample absorption rate. The FTIR results show that the best samples are 6.5 g and 6.5 g rice bark and sawdust, with an absorbance rate of 86% and 14% transmission, which will be used for the manufacture of electronic and communication devices.

Reconstruction of the eyelids, especially medial canthal area, is one of the greatest challenges faced by the oculoplastic, head and neck surgeons. A patient with a medial canthal defect, following oncological resection involving the medial canthus, upper and lower eyelids, and nose is presented. The defect was reconstructed using a transnasal bilobed flap. The transnasal bilobed flap is a simple and effective for medial canthal reconstruction and provides in one-time reconstruction and preserves the local anatomy.

For last decades diabetes type 2, blood’s pressure (especially hypertension) and relating diseases are most serious problems for much people over the world. These diseases are not like other different diseases then for studying them very accuracy, this research choose sample from different societies a small city called “Al-Mejar Al-Kabeer” in south of Iraq. People of this city do same activities than other Iraqi cities and during the last twenty years the only change happened in this city is; they changed them drinking water from tap water to commercial water called it R.O. Population of this city is about 70000 persons and about 20000 from them have diabetes that means more than 28% from all people of this city have this disease, this ratio or may be more for hypertension. Results of this research show that the main reason for diabetes type 2, blood’s pressure and relating diseases is civilization. It shows according good evidences that the right treatment for diabetes, hypertension and relating diseases is about 5g/day potassium ions (K+) with less amounts from sodium ions such as 2:1. In fact, insulin forming from known amino acids so each body need sufficient amounts from these acids therefore the right treatment for diabetes type 2 is not only potassium it must there sufficient amounts from proteins each day or each three days. References of this research indicated; Diabetes and hypertension are well understood but this research find that these diseases need a chemist touch to be fully understood.

Aim: To evaluate sexual dimorphism in horizontal lip position in adults with different skeletal patterns. Material and Methods: The sample comprised of 120 patients (Females 18 years and above, Males 21 years and above) with no history of previous orthodontic treatment or functional jaw orthopaedic treatment. They were divided into different groups based on the ANB angle and gender. Group I and II included 30 males and 30 females with skeletal class I malocclusion (ANB 0-4 degree). Group III and IV included 30 males and 30 females with skeletal class II malocclusion respectively (ANB above 4 degree). Results: When comparison between males and females (Class I+Class II) was done S-line (p<0.001), B-line (p<0.001), E-line (p<0.001), Holdaways angle (p<0.001) and Merrifield angle (p<0.001) were found to be statistically significant. S-line (p<0.001), E-line (p<0.001) and Holdaways angle (p<0.001) were found to be statistically significant when comparison was done between males and females (Class I). When comparison was done between males and females (Class II) only Holdaways angle (p<0.001) showed a significant statistical difference. Conclusion: Sexual dimorphism was found in various lip parameters. Significant amount of differences were found between Class I and Class II (male and female) subjects.

Purpose: To determine the normal value of basal angle measured using the modified MR imaging technique in Thai population compared with the standard value obtained from the Western population. Material and Methods: We retrospectively evaluated midline sagittal SE T1 weighted MR images in 200 adults and 50 children. The basal angle of the skull base was measured using the modified MR imaging technique described by Koenigsberg et al. The angle was formed by a line extending across the anterior cranial fossa to the tip of the dorsum sellae and another line drawn along the posterior margin of the clivus. The mean values of the basal angles among different age groups and sex were calculated and analyzed. Results: The mean skull base angle of our adult population was 115° (range 100.5°-130°, SD=5.7) with an inter-observer agreement of 0.85, slightly smaller than the previous study from the USA which was 117°. There was no significant difference between the male and female groups. The mean skull base angle in our children population was 114.7° (range 102- 130.5°, SD=6.3) with an inter-observer agreement of 0.89, quite similar to the previous USA study which was 114°. There was no significant difference between adult and children. Conclusion: The mean adult skull base angle measured using the modified MR imaging technique in Thai population was slightly smaller than the Western population, while the mean skull base angle of children was quite similar. The basal angle range of 103.6°-126.4° may be used as a guide for the potential range of normal skull base angles in Thai population and possibly also the Southeast Asian population.

Introduction: Several treatment options are available for the optimal treatment for orbital fractures, depending on aesthetic and functional results after orbital wall reconstruction. The objective of this study is to compare the effect and safety of large orbital floor fractures with titanium mesh combined with poly-L-lactic acid/polyglycolic acid copolymer implants (Lactosorb®) vs. autologous costochondral graft. A wide range of permanent and biodegradable materials have been used successfully for orbital floor reconstruction, however they present with disadvantages for reconstruction of large defects, even if combined. Patients and Methods: A retrospective cohort study of patients from Estado de México, México, with access to ISSEMYM health care service, presenting with orbital floor fracture treated at Department of Plastic & Reconstructive Surgery/Maxillofacial Surgery at ISSEMYM Medical Center Toluca between January 2007 and July 2010. Age, sex, etiology, clinical findings, fracture pattern, and treatment modality (Titanium mesh with absorbable implant vs. costochondral graft) were considered. Predictor and outcome variables as complications, inpatient, trauma- surgery interval, surgical time and donor site pain are considered. Results: Follow up of 21 patients (12 weeks) 17 male, 4 female, ages 22-63 was made. Enophthalmos, main objective of this study, was identified with statistical significance presenting 0% (n=0) post-op Group B patients and 30% (n=3) for Group A (p=0.049). Statistical significance was found referring to inpatient days between two groups being less for costochondral reconstruction patients (p=0.02). No pain in patients undergoing alloplastic surgery. An interesting result was that donor area analogue pain scale for costochondral graft was 2.9/10. Conclusion: Surgical outcome and complications where evaluated comparing different materials for orbital floor reconstruction. Costochondral graft is a suitable choice when orbital reconstruction is indicated.

Objectives: The aim of the study was to develop a mathematical model for the visualization and evaluation of transversal palatal soft tissue changes; and to carry out a statistical evaluation of the changes in vertical and sagittal dimensions after rapid maxillary expansion treatment. Material and Methods: 33 Caucasian children with posterior crossbite, 10 boys and 23 girls, aged 7 to 10 years (median 8 years 8 months) were treated with tooth-borne Haas type expander. Dental casts were digitalized by scanner and on the basis of quantitative mesh shape CPD-DCA analysis, coloured morphometrical maps were created. The statistical significance of individual vertex displacements was calculated by performing Hotelling’s T2 paired test. To determine the significance of the vertical and sagittal profile changes, the paired t-test and Wilcoxon signed rank test were carried out in 20 patients Results: Visualization of the palatal soft tissue widening showed it to be greatest in the areas of the second deciduous and first permanent molars with maximum of 0.75 mm for each palatal side. Hotelling’s T2 paired test showed significant differences of p<0.01 in transversal width dimension. Cephalometric measurements of the changes to vertical and sagittal dimensions were statistically evaluated using the Wilcoxon and paired t-tests, and were shown to have insignificant values of p>0.05. Conclusion: The expansion appliance in children resolved the crossbite and led to palatal widening, which was clearly visualized by creating mathematical morphometric models. The cephalometric measurements carried out did not reveal statistically significant relevance in changes to facial vertical or sagittal dimensions.

The mainstays of nuclear substance radiation and isotopic synthesis are nuclear-powered power plants, however effective safety evaluation is made tougher by the complicated construction topologies and physical connection effects. This work proposes a multiphysics-linked technique for evaluating both the kinetic and steady-state behaviors of the MPRR and LVR-15 laboratory reactors. To represent complicated member geometries, homogenized assembling sections are generated using two-dimensional whole-core computational simulations. It is discovered that the steady-state findings and the so-called Monte Carl solution comparisons correspond quite nicely. The greatest assemble power mistakes for LVR-15 and MPRR are 6.49%/10%, and the highest command rod value mistakes are 31 pcm/136 pcm, and the mistakes are 377 pcm/383 pcm, accordingly. Meanwhile, the study is done on transitory procedures, such as reactivity-initiated disasters and exposed loss-of-flow mishaps. Both units' modeling findings show plausible adverse feedback events. Furthermore, it is shown that the two reactors' accident-related behaviors are comparable though having different core architectures since they employ the exact same kinds of water as a fluid. The technique for studying nuclear power plant kinetics known as Multi-Physics Simulation (MPM) is explained. Drawing on many research and verification efforts conducted at Politecnico di Milan, Italy, MPM is shown to be a valuable instrument for managing reactors' security and oversight. It may be viewed as a holistic analytical tool that is implemented during the reactor architecture design phase. The capacity to concurrently answer the interrelated equations that control the many physical processes taking place in a nuclear plant inside the same simulated setting is a core characteristic of MPM.

Background: Literature on ACL injury is limited when assessing for the presence and interaction of multiple risk factors simultaneously. Identifying risk factor interaction may increase the impact of prevention programmes to target ACL injury reduction. The aim of this study was to retrospectively assess ACL injured female athletes to identify which modifiable and non-modifiable risk factors were present at the time of injury. Method: Seventeen female athletes who had sustained a non-contact ACL injury were interviewed retrospectively to assess for the presence of reported risk factors for ACL injury. Result: This retrospective analysis ACL injury cases highlighted a number of factors which were present with high frequency across this group of cases. All had non-contact ACL injury occurring during cutting or landing, which suggests a predisposing deficit in neuromuscular control. This poor neuromuscular control could be exacerbated by the presence of fatigue identified within the cohort. This poor control could be further influenced by the fact a majority of athletes had another significant injury in the 12 weeks prior to ACL injury. The restriction to training could have either decreased fatigue resistance, or potentially changed their movement pattern because of the method of injury management undertaken. Conclusion: This case series provides insight into the interaction of risk factors for ACL injury in sportswomen, with the presence of another injury disrupting training, decreasing the athletes work capacity and fatigue resistance, being compounded perceived or actually elevated levels of fatigue, leading to the potential for abhorrent movement patterns and increased injury risk.